China High Efficient Plastic Granulating Extruding Line

High efficient plastic granulating extruding line

Pictures of the production line
The ASE 80 compacting and pelletizing system combines function of plasticization and pelletizing to one step, applied in the plastics recycling and pelletizing process. ASE 80 is a reliable and efficiency solution for crushed regrinds or flakes of PE/PP/ABS/PS/HIPS/PC etc.
Final productions produced by ASE 80 are in the form of pellets/ granules, can directly put into the production line for film blowing, pipe extrusion and plastics injection, etc.
Specifications:

Model NameASE 80Recycling MaterialCrushed regrinds or flakes of PE/PP/ABS/PS/HIPS/PC etc.Final Product ShapePellets/ GranulesSystem CompositionScrew loader, single screw extruder, pelletizing device, water cooling unit, dewatering section, conveying blower and production siloOutput Range120kg/h-160kg/hFeeding DeviceScrew loader (standard)Screw Diameter80mm (standard)Screw material38CrMoAlA nitride steel( SACM-645), bimetallic ( Optional)Screw L/D32/1 (depending on features of recycles)Barrel's HeatingCeramic heater or Casting Aluminum heaterBarrel's CoolingAir cooling through fan blowersVacuum DegassingDouble vented degassing (Standard)Pelletizing TypeWater ring die-face hot pelletizingVoltage StandardDepending on project's locationDelivery Time60 days after order takes effect.Warranty13 months since date of bill of ladingTechnical ServiceProject design, suggestion on factory construction, installation and commissioning

Working steps of ASE 80 compacting and pelletizing system
1. Feeding: as standard design, lumps or thick flakes after crushed conveyed into the extruder through screw loader. Motor drives of loading and hauling device cooperate with ABB inverter. Feeding speed of screw loader is fully automatic.
2. Plasticization and degassing: A specialized single screw extruder applied to gently melt the material. The plastic scraps will be well melted, plasticized in a 32D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiency, especially suitable to heavy printed film and material with some water content.
3. Melt filtration: a regular single-plate/ piston double-station screen changer or non-stop double-plate/ piston four-station can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
4. Pelletizing: die-face water ring pelletizing system set as the standard granulating method in ASE system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. RPM of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.

Main technical parameter:

Machinery SizeData of single screw extruderThroughout rate(Kg/hr)Diameter of screw(mm)L/DMotor power (Kw)ASE80803255120-160

Advantages of ASE 80 plasticizing and pelletizing system
1. Plasticizing and pelletizing steps in one system, less-labor cost;
2. Higher efficiency feeding, suitable to film, filament, raffia, foaming materials;
3. Higher output and lower energy consumption.