China High Frequency Mining Linear SDewatering Vibrating Screen Machine

High frequency mining linear sand dewatering vibrating screen machine
Introduction of dewatering vibrating screen equipment:
The dewatering screen is mainly used for dewatering, desliming, and degrading.It can be used for sand washing in sand and gravel plants, coal slime recovery in coal preparation plants, and dry tailings of concentrators, so it is also called sand dewatering screen, mine dewatering screen, Coal slime dewatering screen, tailings dewatering screen, high-frequency dewatering screen, etc.Although both belong to the dewatering equipment, the structure of the dewatering screen is different when it acts on different materials.For example, the sand dewatering screen on the sand washing production line and the tailings dewatering screen commonly used in concentrators are different equipment.This vibrating dewatering screen is mainly used in wet sand production line, and can be used with sand washing machine or alone.
Brief introduction of dewatering screen:
Use with sand washing machine
Why should the two be used together?We must know that the sand washed by the sand washing machine is not very clean.The sand not only has a certain mud content and is too wet (high water content), which does not meet the production requirements for low sand mud content and high standards..Therefore, it is necessary to configure a vibrating dewatering screen for dehydration and desliming!After the sand is cleaned by the sand washer, it is desilted and dewatered and screened by a dewatering screen to achieve a reasonable particle size ratio and reduce the mud content to less than 0.7%.
Dewatering screen is used alone
The dewatering screen can also be used alone when it is used for some materials with low mud content, without sand washing machine, such as quartz sand.Because quartz sand generally has low mud content, the use of sand washing machine to wash sand not only consumes energy but also has poor effect.More importantly, the investment cost of dewatering screen is lower than that of sand washing machine.
Working principle of dewatering vibrating screen:
The dewatering screen adopts dual-motor self-synchronization technology, universal eccentric block and adjustable amplitude vibrator.It is mainly composed of screen box, vibration exciter, supporting system and motor.Two unconnected vibrators operate synchronously and reversely.The centrifugal force generated by the two groups of eccentric masses is superimposed along the vibration direction, and the reverse centrifugal offset is offset, thus forming a single exciting vibration along the vibration direction, making the screen box reciprocating Linear motion.The exciting force provided by the vibrating motor to the screen machine makes the material jump in a straight line on the screen surface to achieve the purpose of dewatering, grading, de-intermediation and de-sliming of the material.
Performance advantages of dewatering screen:
1.The dewatering screen is made of polymer polyurethane (UHMW----PE), with a hardness of 95, and an opening rate of 100%.It has impact resistance, low temperature resistance, abrasion resistance, chemical corrosion resistance, self-lubrication, and impact energy absorption.Features and long service life.
2.The vibration motor of the dewatering screen is easy to replace, and the base rubber spring is used to absorb vibration, so that the amplitude is not large, and the slow vibration can be taken off cleanly.The screen frame is made of special materials, the whole plate is laser cut, and the screw hole is laser cut, no welding, and high precision.
3.The dewatering screen can be customized according to the output and water content.The side panels of the fuselage have reinforced plates, the bottom is equipped with supports, the bottom is struck with horizontal bars, and the discharge port is supported by triangular steel plates, and the plate is thick.
4.The equipment adopts high-strength torsion shear type fastening bolts.High-strength torsion shear bolts are first tightened, and the links of each part are closely coordinated to achieve the strength of the design specification.
5.The motor beam is made of special material, 24-26mm steel plate thickness, which can effectively eliminate stress, and has the characteristics of strong durability, good supporting performance, large bearing capacity and strong stability.
6.The equipment is produced by laser cutting and punching, with small tolerances.Double screw holes are reserved for the motor base, and the vibration motor can be installed horizontally or vertically.
7.Before delivery, the staff will debug it to check whether the vibration motor is normal and whether the exciter is running well to ensure that the factory output is guaranteed for customers.
Technical parameters of dewatering screen:
ModelPower(kw)QuantityProcessing capacity (t/h)Feed size (mm)Screen parametersTotal Weight (KG)Dimensions (mm)Dewatering screen specifications (MM)Screen area (m2)Screen materialTS09180.75*2210-30≤10900*18001.6imported polyurethane5351885*1307*1133TS09241.1*2210-30≤10900*24002.2imported polyurethane6302483*1307*1271TS12242.2*2240-60≤101200*24002.88imported polyurethane10802515*1607*1399TS12302.2*2240-60≤101200*24002.88imported polyurethane12803084*1590*1439TS12363*2240-60≤101200*36004.32imported polyurethane14253677*1590*1498TS15303*2280-100≤101500*30004.5imported polyurethane15503083*1907*1484TS15363*2280-100≤101500*36005.4imported polyurethane17503683*1890*1601TS18364*22100-150≤101800*36006.48imported polyurethane29003760*2381*1900TS18404*22100-150≤101800*40007.2imported polyurethane31004116*2381*2049TS18424*22100-150≤101800*42007.56imported polyurethane32004316*2381*1976TS18454*22100-150≤101800*45008.1imported polyurethane34004900*2380*2050TS18484*22100-150≤101800*48008.64imported polyurethane35004900*2381*2000TS24427.5*22180-200≤102400*420010.1imported polyurethane34004315*3085*20042TS24457.5*22180-200≤102400*450010.8imported polyurethane46514616*3085*2248TS24487.5*22180-200≤102400*480011.52imported polyurethane49004915*3085*2242
FQA
1.Q:Are you trading company or manufacturer?
A:We are original equipment manufacturer.
2.Q:How long is your delivery time?
A:It is according to the model and quantity.
Generally it is 3-5 days if the machines are in stock.
It will be 15-30 days if you want to customize the machines.
3.Q:Do you provide samples?Is it free or extra?
A:Yes, we could offer you the sample machine.
But it's not free.You need to pay for the sample and the cost of freight.
4.Q:What is your terms of payment?
A:We accept T/T, Western Union, Money Gram, Paypal, Escrow etc.
Payment<=USD 5000, 100% in advance.
Payment>=USD 5000, 30% T/T in advance, balance before shipment
Packaging & Delivery:

Our company:
Our certificate:

Contact us for more details:


Add:Guancheng District,Zhengzhou City,Henan,China 450000
Zhengzhou Double Best Machinery Co.,Ltd