China High Power Hidden Voice Recording Jammer

The "Concealed" Recording Shield is a highly integrated high-tech security product developed by AL ASAR TECH. When a criminal uses a recording device (such as a mobile phone, voice recorder, recorder, etc.) to record you, the recording mask produces a random noise signal that can suppress the interference of the voice signal, so that the recording device can only pick up Noise information, and can not distinguish voice information, thus ensuring the security of voice information.
Application: leading offices, secret meeting rooms, military war rooms, business negotiation rooms, etc.

Itemperformance parameterShielding typeMobile phones, recording pens and other sound acquisition devicesShielding distance>2.5m (shielding distance of different recording equipment is different)Function angle>120 degreeOpening moderemote controlRemote control distance>10mBattery Capacity8000mah/12vsize283*133*157mmweight1.5kgambient temperature-40ºC~55ºCrelative humidity35~85%The power adapterAC 100V~240V DC 12v 5A Packing instructionsProtective box

Instructions for use
powered by
This product uses two power supply modes: power adapter and battery.
1. When the adapter is powered. Simply plug the power adapter into the power and charging ports of Figure 2.
2. This product has 8000Mha battery, which is used to power the battery without power adapter.
use
After checking the product, check the package first: one host; one remote control; one power adapter
1. Turn on the power switch of Figure 2, the power indicator lights up, and the machine enters the standby state;
2. Press the unlock button of the remote control to turn on the machine, press the lock button of the remote control to turn off the machine and enter the standby state.
3. Turn off the power switch in Figure 2 and disconnect the power from the machine.
Note: The built-in large-capacity battery has a working time of more than 19 hours. It is recommended to use the battery if it has electricity.
Figure 3
As shown in Figure 1, the transmitter is at the front of the machine. For best shielding, adjust the position and angle according to the actual situation. For details, see Figure 3. As shown in Figure 3, for general recording equipment, the cutoff distance of this product is about 1.5 meters, and the cutoff angle is about 90 degrees. The distance and angle may vary for different recording devices. Some models have a distance greater than 2 meters and an angle greater than 120 degrees, but a few models may have a distance of less than 1 meter and an angle of less than 60 degrees.
The higher the end of the general model, the better the effect. When using, please try to make the distance between the transmitter's transmitting end and the recording device within 1.5 meters. The angle (mainly the MIC port) is within 45 degrees. The closer the distance is, the smaller the angle is, the better the cutting effect is.
Please note that the above data is obtained without any barrier between the transmitter and the recording device (such as clothes, body, etc.). In the case of blocking, the cutting distance will be shortened.