China High Recovery Rate Lead Ore Flotation Machine Flotation Separator

High recovery Rate Lead Ore Flotation Machine Flotation Separator
General introduction
flotation cell is a process for separating minerals from gangue by taking advantage of differences in their hydrophobicity. Hydrophobicity differences between valuable minerals and waste gangue are increased through the use of surfactants and wetting agents. The selective separation of the minerals makes processing complex (that is, mixed) ores economically feasible.
The flotation cell is used for the separation of a large range of sulfides, carbonates and oxides prior to further refinement. Phosphates and coal are also processed upgraded by flotation technology.

Main features of flotation machine
1.The flotation cell consumes little amounts of energy while at the same time maintaining a high air-absorption rate capacity.
2. The flotation cell is made up of individual cells which independently form a flotation separation loop without the need for any auxiliary equipment. Each of the cells is located horizontally to facilitate the easy change of flow.
3. They all are designed to carry out the following functions: air absorption, slurry absorption and flotation separation.
4. The mineral slurry circulates at a reasonable rate and the disposition of coarse sand is largely avoided.
5. A self-control device is located on the surface of the mineral slurry facilitating easy adjustment of the level.


Working principle
Mechanical cells of flotation cell use a large mixer and diffuser mechanism at the bottom of the mixing tank to introduce air and provide mixing action. Flotation columns use air spargers to introduce air at the bottom of a tall column while introducing slurry above. The countercurrent motion of the slurry flowing down and the air flowing up provides mixing action. Mechanical cells generally have a higher throughput rate, but produce material that is of lower quality, while flotation columns generally have a low throughput rate but produce higher quality material.

Main technical parameters

Model
XJK-2(A)
XJK-3(A)
XJK-4(A)
XJK-5(A)
XJK-6(A)
XJK-7(A)
Slot Volume(m3)
0.23
0.35
0.62
1.1
2.8
5.8
Impeller Dia.(mm)
250
300
350
500
600
750
Impeller Speed(r/min)
500
483
400
330
280
240
Capacity(m3/min)
0.12-0.28
0.18-0.5
0.3-0.9
0.6-1. 6
1.5-3.5
3-7
Slot Size(mm)
600x600
x650
700 x 700
x750
820x900
x850
1100x1100
x1000
1750x1600
x1100
2200x2200x200
Power(Kw)
3/2 slots
3/2 slots
3
5.5
11
15
Weight(kg/Slot)
1158/4
1720/4
2500/4
4514/2
4514/1
7066/4