China High Reliability S-120 Switching Power Supply

AC/DC, DC/DC Switching Power Supply (SMPS) 60W Single Output S-60
Features:
1) Low price and high reliability
2) 105ºC output capacitor
3) AC input power suitable for the whole world
4) High efficiently and low operation temperature
5) Soft-start current can reduce the AC input impact efficiently
6) with short-circuit and overload protection
7) Compact size, light weight
8) 100% full-load burning test
9) Installed with EMI filter, minimum wave

Model / SpecificationS-60-5S-60-12S-60-15S-60-24DC output voltage5V12V15V24VOutput voltage error(Note: 2)± 2%± 1%± 1%± 1%Rated output current12A5A4A2.5AOutput current range0-12A0-5A0-4A0-2.5AWave and noise(Note: 3)120mVp-p120mVp-p150mVp-p150mVp-pInlet stability(Note: 4)± 0.5%± 0.5%± 0.5%± 0.5%Load stability(Note: 5)± 1%± 0.5%± 0.5%± 0.5%DC output power60W60W60W60WEfficiency73%76%77%79%Adjustable range for DC voltage± 10, -5%± 10%± 10%± 10%AC input voltage range85~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDCInput current2A/115V 1A/230VAC impulse currentCold-start current 30A/115V 60A/230VLeakage current< 3.5mA/240VACOverload protection105%~150% Type: current limiting; Reset; Auto recoveryOver-voltage protection… …High-temperature protection… …Temperature coefficient± 0.03%º C (0~50º C)Setup rise hold up time800ms, 50ms, 10ms/115VAC 300ms, 50ms, 80ms/230VACVibration10~500Hz, 2G 10min. /1cycle, Period for 60min, Each axesWithstand voltageInput and output interval: 1.5KVAC,Input and enclosure: 1.5KVAC,Output and enclosure: 0.5KVACIsolation resistanceInput and output interval,Input and enclosure,Output and enclosure:500VAC/100MΩWorking temperature and humidity -10º C~+60º C,20%~90%RHStore temperature and humidity -20º C~+85º C, 10%~95%RHOverall dimension159*97*38mmWeight0.55KgsSafety standardsMeet UL 1012 requirement (not apply for the mark)EMC standardsmeet FCC Part15 J Conduction class BNote:1. The testing condition for the parameter above is: 230VAC input,rated load, 25 degrees Celsius 70%Rh, Humidity2. Error, include the setting error,line stability and load stability. (Note: 5)3. Wave test: adopting“ A12” double wire for 20MHz, and 0.1uF& uF capacitor short-circuit for interrupting4. Inlet voltage stability test:when is over load,the lowest voltage of inlet is representative to the highest voltage.5. Load stability test:The load is from 0% to 100%, others 60%.6. C2,3,11must be knocked down.