China High Speed Automatic Plastic Paper Packing Shopping Carton Box Cup Bag Plate Straw Lid Foming Making Machine

1450-Straight line- double side-lock-bottom-4-6corner function
Folding Gluing Machine
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
ModelZH-M1450 4/6Suitable materialAB/BE/A/B/C/E/F flute , Card board210-850gsm Max methodAutomatic continuous feeding Max mechanical speed300m/minOverall dimension19700*2300*1650mmWeight13.5TPower consumption27.2KW,380V,50HZCompressed air6 bar,10 m³/h,60 LMachine configuration
Main motorGPGPLCSiemensInverterSiemensTouch screenSiemensDriving Bearing NSKPlain beltNITTA JapanLow voltage apparatusSchneider( Relays, contactor,breaker,Button)Photo SwitchPanasonicWall thickness20m (right side,left side) temperedGluing systemKQ CHINAServo motorDelta (Taiwan) for back foldServo motorVEICHI China (control the folding section belt)another company without it

Feature:
1.Feeder Section
·Friction feeder. Independently driven by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates fully adjustable to the width of the blank.
2.Paper Alignment System:
Independent section that registers the blank to one side ensuring a perfect parallelism before entering the pre-folding or gluing sections.
Independently driven by motor.
Possibility to register on any side of the machine.
Fast and easy setup.Configuration reducer, different boxes when the conversion, the reducer with electric regulation
3.Pre-fold Section: The pre-fold section has the advantage to make the box more plain and easy to open,even in some case the scoring is not very well.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and 3rd crease openers.
Configuration reducer, different boxes when the conversion, the reducer with electric regulation
4.Bottom Lock Section
Lock-bottom assembly mechanism with high elastic hookers is of deal design,fast and easy operation.
·Independently driven by motor.
Complete set of folding hooks and helixes for smooth and accurate folding of front flaps
Adjustable hook tension.
Fast and easy setup
Configuration reducer, different boxes when the conversion, the reducer with electric regulation.
5.Down Gluing section
·Two lower (left and right) gluing tanks.
·Easy to remove and clean.
6.Folding Section
Independently driven by motor.
Smooth and accurate folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable speed controlled by inverter
Easy accessibility.
Configure the servo motor to adjust the belt speed,Make the box more neat

7.Trombone Section
·Independently driven by motor.
·Upper and lower drive mechanism for length adjustment.
·Allows a perfect understack or overstack stream of boxes.
·Equipped with automatic belt tension-adjusting system.
·Continuous and automatic box collection mechanism that ensures a neat transfer to the Press section, guaranteeing an aligned flow.
8.Press Section
·Independently motorized pneumatic press section.
·Upper section moves back and forward through a motorized system, allowing different box length.
·Pneumatic pressure regulation.
9.Back-folding device·Motorized and untimed electronic back folding system with intelligent servo-motor technology.
·Two independent servo motors, one for each shaft.
·Versatile and easy to setup.
Gluing system
1. Main technical parameter:
ModelHZ4
Input voltageAC220V (±20%)50-60HZ
Power480WGlue-like precision±1mmGel-point4 typesModelHB6Guns3To adhesives max viscosity3000mPasEach two-way transport efficiency6:1Gas source input requirements2-8barWeight25kgSIZE1280*480*600mm
Plasma Surface Treatment
Main technical parameter:
ModelCLEAN-PL-5020
Input voltageAC220VNominal power1500AVPlasma power supply frequency20-30khzAir supply pressure60L/m³Dimension720*970*1270Outlet angle<20mm 2 gunsWeight95kg