China High Speed Manual Rotating Mixer

High Speed Manual Rotating Mixer
Model:HT-40C


1. Feature:
(1). Easy moving or fixing of interior case support, save you time and power.
(2). Revolution and rotation may start synchronously during paint mixing.
(3). The revolution and rotation speed is controlled perfectly to make sure the machine will work steadily.
(4). The machine will stop immedietly when open its door, safe and reliable.
(5). With aluminum hand sliding door.


2. Characteristics:
The under clamping board moveable out, so that will be easy for you to load on the heavy big paint drum (other suppliers can not, that is why our machine is more expensive).
Equipped with mixed, will put various raw materials in airtight containers, and then use our mixer fully mixing and stirring.
The working principle is airtight container jar two-way rotation and rotation, so that to achieve the purpose of efficient mixing.
In the tank sealing mixing, need not stir bar devices such as cleaning, reducing device cleaning process, avoid cleaning sordid lead to material cross contamination.
After mixing materials not only uniform, and are very exquisite.

3. Technical Parameters:
1). Applicable Range: 0.5-20L (paint in drum)
2). Height on the Drum: Diameter of the drum from 70mm to 300mm
3). Working Power: 220VAC 50Hz
4). Power:750W
5). Time Set:0-15min
6). Revolution Speed: 130r/min
7). Rotation Speed:260r/min
8). Net Weight: 200Kg
9). Gross Weight: 240Kg
10). Case Size: 1035(H) x 800(W) x 720(D)mm

4. After Sales Service:
The above machine which we supply it to you, we can give you one years after sales warranty, we can also send our engineer to your factory to install this equipment and train your staff, but the Buyer should pay the round air ticket cost and arrange the hotel accommodation as well as the means for Seller's engineer.
5. Payment terms:
30% deposit by T/T before production, 70% balance should be paid by T/T before shipment, but we also accept L/C.
6. Package:
Pack in 1 case: 1130(H)x820(W)x880(D)mm
1. Wrap with plastic film
2. Pack in wood or non- wood case
7. Shipment terms:
We can accept EXW, FOB, CNF, CIF etc.
8. Company Introduction:Our Company is the true manufacture of the paint tinting equipments, we are always improving our design and patterns to confirm to the world market according to the customers requirement, and then a large number of production.

If you are interested in it, please do not hesitate to ask us for quotations and offers, which will receive our careful attention, and we assure you of our close cooperation at all times.