Features
ZT-MDV55 is designed for machining complicated mold profile, automotive parts, and housing parts. It has distinguished advantage in machining mold, especially the small size mold. It has big torque output at low speed range, which is suitable for high strength steel and high temperature alloy steel which are difficult for machining.
High accuracy; High speed; High rigidity
ZT-MDV-55 SpecificationTable size (LxW)1050x560mmWeight of workpiece800 kgTravel X-axis1020mmTravel Y-axis550 mmTravel Z-axis510 mmDistance from spindle center line to vertical rail of column615 mmDistance from spindle nose to table 150~660 mmDistance from spindle center line to column way cover560mmFeed rate X/Y/Z axis1~10000 mm/minRapid travel X/Y/Z axisX/Y: 30 m/min Z: 20 m/minTable T-slot: (slot size x distance x numbers)18X110X5Height of table from floor950mmManual feed speed2000 mm/minTool shank typeJIS B 6339 50TPull stud typeMAS145°No of tools in magazine30Max tool diameter (with adjacent tool)Ф110(Ф103)mmMax tool diameter (adjacent empty)Ф200 mmTool length (from spindle nose)350 mmMax tool weight (torque)20(29.4) Kg(N.m)Tool selection wayAny toolTool change time (T-T)2.0sec(varies per tool weight)Tool change time(chip-chip)5.9 secSpindle speed12000 rpmSpindle taperNo.50 (7:24 taper bore )Speed levels by gear2 levelsSpindle front bearing IDФ85FANUC Spindle motor power (30min/continuous)AC15/11 kwCoolant pump rate0.4KWLubricating pump rate for guide ways0.017KWSpindle chiller pump rate0.75KWATC motor rate0.75KWTool magazine motor0.4KWTool socket turnover motor0.09KWScrew type chip conveyor motor0.2X2 KWPower supply:FANUC28KVAVoltageAC380±10% VFrequency50/60 ±1 HzAir pressure0.4~0.6MpaFlow of pressure air160L/minCoolant tank280LOil tank for spindle cooling30LOil tank for guide way lubrication6.0LMachine height (with Fanuc motor)2846mm
FAQ
1. How can I choose the most suitable machines ?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5. What's the Payment Terms ?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable but it will subject additional bank fee.
6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.