China High Strength EPS Cement Sandwich Wall Panel with 3D Steel Mesh

What is Composite EPS Sandwich Cement Wall Panel?
The ZJT wall panel is a lightweight composite wall panel having a solid concrete core used for quick assembly of interior and exterior walls. With the aim to modernize commercial, residential and industrial structures and buildings, the wall panel pushes beyond boundaries in pursuit of a more ecological and sustainable society. As a replacement to traditional hollow blocks, brick-laying techniques, the ECOWALL is designed for speed, durability, environmental friendliness and most of all cost-effectiveness.
Low Overall Cost
Overall construction savings from a material, space, time and efficiency standpoint.

Easy and Fast
Direct application. Ready for rendering, coating, painting and other finishing.

Thin and Light
Lightweight but durable (average weight of 65 KG/sqm). Saves at least 20% floor area space.

Durability
High compression strength for a non-load bearing wall material with good earthquake resistance.

Heat Insulation / Preservation
Cooling effect against outside heat by maintaining the temperature inside the walls.

Water & Fire Proof
Fire rating of up to 4 hours with an anti-moisture face that can be exposed to open air environment.

Sound Insulation
Great for partitions that require sound proofing of up to 44dB in residential and commercial spaces.

Strong Hanging Strength
Single point hanging strength can take up to 70KG

Versatility
Applications in many forms of construction from vertical to horizontal structures, and in various components of the project such as inner/outer walls, floorings and roofings.
The Production Process

Properties

ItemParameter Index Specifications60mm75mm90mm100mm120mm150mm1Anti-impact capacity/times≥5≥5≥5≥5≥5≥52Anti-bending damage load/times over deadweight≥3.0≥3.0≥3.0≥3.0≥5.0≥5.03Compressive strength/Mpa≥3.5≥3.5≥3.5≥3.5≥3.5≥3.54Softening coefficient≥0.8≥0.8≥0.8≥0.8≥0.8≥0.85Surface density(kg/m²)≤70≤70≤90≤90≤110≤1106Moisture rate(%)≤10≤10≤10≤10≤8≤87Dring shrinkage value(mm/m)≤0.5≤0.5≤0.5≤0.5≤0.5≤0.58Hang force(N)≥1000≥1000≥1000≥1000≥1000≥10009Sound insulation capacity in the air(dB)≥35≥35≥40≥40≥45≥5010Fire endurance(h)≥1.5≥1.5≥2.5≥2.5≥3.0≥4.511Heat transfer coefficient(w/m².k)≤2.0≤2.0≤2.0≤2.0≤2.0≤2.012Inner radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 13Outer radiation index≤1 ≤1 ≤1 ≤1 ≤1 ≤1 14Frost resistance(shall show no visible cracks and surface without change)__shall show no visible cracks and surface without change15The combustion properties(A1 or A2)__A1 or A2

Advantages
Compared with the traditional building materials, ZJT light weight energy saving composite sandwich wall panel has more practical and prominent advantages when used to different kinds of construction and projects.
The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which can adjust the indoor temperature at a constant range to achieve the effects of ecological adjustment.
The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials are the mixture of cement, sand, fly ash, etc.It does well in the fireproof and waterptoof.
The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus it can save a lot of labor and time cost for the construction part.
The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
The panel is solid and strong physical performance,anti-corrosion,high strength and low damage rate.If ZJT's dry splicing method was put to use ,wall panel reuse rate would up 93%which can save 71%~95% of wall panel cost.
ZJT panel can meet various of demands and can be easily slotted to bury pipes and electric wires and also will reduce dust and increase the operation environment quality.
Applications
Our panel can be applied on : Roof/Floor/Internal/External/Partition Wall of Hotel,Hospital,Residential Building,Shopping Mall,Prefabricated house,etc.

ZJT Sandwich Panel Application
1).Floor ApplicationZJT light weight compound sandwich panel can be innovatively used as floor board.This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
2).Villa&Exterior Wall Application
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
3).Interior Partition Application
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
4).Roof ApplicationLight weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction.Its easy construction time brings out its hight integrated performance.
5).Pipe/Fire Well/Equipment Partition ApplicationZJT light weight energy-saving sandwich wall panel has features of lightweight, easy cutting, dry used,and easy installation.It is the most suitable wall panel for pipe well, air sharft, fire well, equipment partition and room partition wall.

Installation and Accessory Materials
:making the base line of the installation position of the wallboard.
↓
:cutting and adjusting the width and length of wallboard on the basis of the requirement.
↓
: blending the ZJT cement mortar and plastering it into the gap and base line bettwen the wallboard.
↓
: moving the mortar-covered wallboard to the right position and using crowbar to ensure the wallboard are tight with another one.
↓
: filling the vacant position of the wall
↓
: fixing the wallboard with wooden wedge, spiking steel bar into the glued wallboard an two steel bars should be spiked beyong 120mm wall board.
↓
: clear away the facial panel cement mortar and press it tightly with round steel bar.
↓
after about one week, taking out the wooden wedges and paste the anti-crack tape with cement mortar.
↓
: do not dig the same place in the two wallboard facial and the deep can't beyond 2/3 of the wallboard.
↓
to finish the wal, tiles can be paste without any scraping and wallpaper also can be applied directly.
Accessory Materials
Steel Bar
Cement Mortar
Wooden Wedge
Anti-crack Tape
Electric Circular Machine

Loading

Items(mm)Single(piece)Load by 20'GPLoad by 40'GPm³Kg/pcsKg/m2Qty(pcs)m2TonsQty(pcs)m2Tons2270x610x600.08473431343315525727262270x610x750.10674825234917364504262270x610x900.12775620728716322446262270x610x1000.14876318926218280388262270x610x1200.17987116222416252349262270x610x1500.211471061261741814720426 2440x610x600.09604024035715420625262440x610x750.11805420430417308458262440x610x900.13906016825016336500262440x610x1000.151006714421415240357262440x610x1200.181107410816112216321262440x610x1500.22160107781161615623226

Packing
Free packing: normal pallet + packing belt
Standard exporting packing: good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
Loading: Normally 18 pallets per 20' container or according to clients' requirements
FAQ
1. What is your mainly products?
Our mainly products are sandwich wall panel and color steel panel .
2. What is your delivery time?
One 20'GP container, about 10 working days.
3. How about the samples?
The samples is free, but the delivery cost will be on ur account, and we will deduct it after you place the order.
4. What is your time of making samples?
Usually we will take 1~3 days to make the sample.
5. What is your payment terms?
Normally we accept 30% T/T in advance,70% after shipment. Or Irrevocable L/C.
6. What is the shipping port?
Xiamen port.
Company
Xiamen ZhongJingtai Building Materials Co., Ltd, a professional high-tech research and development company specializes in producing new energy-saving wall materials, machinery and equipment development, technology production and promotion of product applications. Our company is situated in the charming city---Xiamen, with convenience of water and land transportation and only 15 minutes from the airport. We focus on persuing to the environmental and energy-saving modern wall materials and also positively respond to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. In addition, We can produce more than 2 million square meters of various wall materials annually. Quality fisrt, honesty and win-win cooperation are our management ideas.
Our company relying on the advanced equipment, first-class technology, excellent quality, strong productivity, favorable customer service system, has set up the good brand image in the market and been widely recognized by many other countries.If applied it on your buildings, it will improve your work effeciency, promote your work environment, save your work time, save your living space and be convenient for the late maintenance. We have been taking part in the trade shows in home and abroad and getting more cooperations and recognizations with foreign customers.
We have exported to many places around the world, such as, Saudi, Philippine,Jordan,Dubai,Australia,Canada,Quatar.Our clients are speak for us.
We adhere to the Concept--first-rate service,quality first and win-win cooperation.
Contact
If you have any questions or interest in our products, please feel free to contact me and let's talk more details.

Website: http://www.sandwich-wall-panel.com
Company Address: Xiamen ZhongJingTai Building Materials CO., Ltd.
Unit 2A, Lianchang Building, No 6-8Huli District,Xiamen, China.