China High Temperature Capacitor Film

Description:
Capacitor film, metallized film , metallized polypropylene film , metallized polypropylene film for capacitor , capacitor grade metallized film , metallized film for capacitor use, MPP film , metallized polyester film , metallized capacitor film , metallised capacitor films.
Coating a thin Aluminum layer on the surface of plastic film, will get high self-healing Aluminum metallized film for capacitor use.
The prominent feature of metallized film is its self healing ability. That is, when somewhere is breakdown, short-circuit current can make the film around the breakdown area melting and evaporation to recover its insulation property. Thus significantly reduce the impact on the breakdown strength by conductive defects and weakness in paper or film, thereby improving the working field.
Generally the thickness of the metal layer is 5nm-50nm, but on the international it can be 1nm-100nm. In terms of heat resistance, 1nm-100nm is preferred, while consideration of electric properties, 5nm-50nm is more preferred.
Under the same evaporation conditions, the larger the coating thicknessδ, the smaller square resistance (Ω/) , the smaller the resistance R, the greater the load current, while the worse self healing properties.
Features:
The metal plate of anti-explosion pattern metallized film is divided into a number of small units, these units are connected with fuses. When the non-self-healing breakdown occurs, the fuse is burn-out, the breakdown area is cut off and isolated. Since the capacitor unit consists of many small units, thus the isolated small unit has little influence on the capacitance of the capacitors.
Al metallized film has a better over-current performance.
Al metallized film has a better moisture resistance.

Types of metallized Layer:

Storge
metallized film should be stored in its original package until its use with temperature 5 ~35ºCand humidity less than 85%RH.
metallized layer is easily oxidized when exposure to moisture. Therefore, the film should be used as soon as possible when opened.
The recommended temperature is 15 -25ºCwith humidity less than 60%RH after the package is open
With original sealed package, and stored in the above mentioned conditions, the storage time can be as following:
Al metalized Film: 12 months from the delivered date
Al/Zn Alloy metallized Film: As Zn is relatively unstable, preservation period depends on the resistance of the film:
Less than 10 Ohms: 6 months (from delivery date)
10 Ohms to 15 Ohms: 3 months (from delivery date)
15 Ohms: 1months (from delivery date)
For more information,you can contact and view our website:
www.capacitorfilm.com