China Highly Durable Cooked Starch Transfer Pump for Paper Industry with Non-Stop Working

Brief introduction

As a recognised market leader in starch pumping, YL has been supplying its rotary lobe pumps to numerous processes for over 15 years, including Corn, wheat, potato, sweet potato, cassava starch etc. YL Committed to offer high quality pumps to our clients with affordable price. The pumps we made not only durable but efficient, can definitely save a lot of your time and cost. We select the pump according to your characteristics of medium and condition of the technological requirements, bring you the best pump for your critical process.

Why our pump for your starch

--All the contact parts are made of stainless steel, no wearing part.
--Non-contacted pump head design, ability to pump abrasive media.
--No friction, long life.
--Low shear pumping, ability to pump sensitive media, such as latex and starch based coatings.
--Simple assembling and disassembling, easy to maintenance with few special tools, small space and human.
--High efficiency and energy-saving, low failure rate, reliable sealing and low noise.
--Dry running is allowed with our special designed mechanical seal.
--Improve your productivity and reduce cost.

Case

A manufacturer of test liners and corrugated medium used our rotary lobe pump to convey starch in the production process. Test liner is two-ply or multi-ply layers made completely of recycled paper. It is the raw material and of major significance in the corrugated cardboard industry. Corrugated medium is made of recycled paper collected from households and department stores. To achieve optimum stiffness, this raw material is often treated with starch
or resin.

Pump Specifications

Model

Displace-ment

(L/r)

Speed range

(r/min)

Capacity
range
(M³/h)

Max.
Pressure

(Mpa)

Power

(Kw)

Suction

pressure

(Mpa)

Inlet

&outlet

(mm)

Max.
Viscosity

(cp)

25BV12-2

0.15

20-600

0.09-4.32

1.2

2.2

-0.02~-0.08

25

1000000

40BV12-5

0.32

20-550

0.18-7.92

1.2

4

-0.02~-0.08

40

1000000

50BV12-8

0.47

20-550

0.28-12.4

1.2

5.5

-0.02~-0.08

50

1000000

50BV12-10

0.65

20-550

0.39-17.16

1.2

7.5

-0.02~-0.08

50

1000000

65BV12-20

1.74

20-550

1.04-45.94

1.2

15

-0.02~-0.08

65

1000000

80BV12-30

2.5

20-550

1.5-66.00

1.2

22

-0.02~-0.08

80

1000000

80BV12-40

3.65

20-550

2.19-96.00

1.2

30

-0.02~-0.08

80

1000000

125BV12-50

4.6

20-420

2.76-92.74

1.2

37

-0.02~-0.08

125

1000000

125BV12-70

6.1

20-420

3.66-122.98

1.2

45

-0.02~-0.08

125

1000000

125BV12-80

7.0

20-420

4.20-141.12

1.2

55

-0.02~-0.08

125

1000000

150BV12-100

11.4

20-420

6.84-229.82

1.2

75

-0.02~-0.08

150

1000000

150BV12-150

12.5

20-420

7.50-252.00

1.2

90

-0.02~-0.08

150

1000000

175BV12-200

16.7

20-420

10.02-336.67

1.2

110

-0.02~-0.08

175

1000000

Note*
1. Tested medium: water. Your liquid's density, viscosity and temperature are necessary to supply when choose the pump.
2. Speed, flow rate, electrical power and pressure will be varified according to different liquid properties.
3. Port size can be changed as needed.
4. YL reserves the right to change specifications without prior notification.

How to choose our pump

Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer.

Selection GuidelineBuyer informationCompany name Contact person Website Email Address Mobile No. Tel/Fax No. online chat ID. Liquid informationYour industry: __________ Liquid name:___________ Features: Sanitary[ ]Corrosive[ ] Poisonous[ ]Viscosity:_______cp Density:_______ Temperature:_____ºC PH value:________Solid content:_______ Max. size of particle:_______ Using conditionCapacity: Max. required:__________ L/H Working required:__________ L/H Discharge pressure: Max. required:__________Mpa Working required:__________ MpaSuction pressure: Max. required:__________Mpa Working required:____________ MpaDelivery head required:____________ Vacuum:________ MpaHeating jacket required: Yes[ ] No.[ ] Heating temp.:_____ºC Liquid inlet/outlet direction: Horizontal[ ]vertical[] Pipe size: Inlet___________ Outlet____________Connection type required: Flange[ ] Thread[ ] Clamp[ ]Installation type: Fixed [ ] Movable[ ]Operating status: Continuous[ ] Interruption[ ]Liquid contact material: SS304[ ] 316[ ] 316L[ ]Others________Special request_____________________________________

--More than 17 years of expertise and technical know how.
--We design, R&D and produce.
--We have obtained 30 patents, such as invertion patents, utility model patents. ISO9001:2015 approved company, CE certified pumps.
--Own one set of full automatically pump testing system, over 65 sets of advanced CNC machines, including mills, borers, lathes, drillers, grinders, machining centers etc. and a variety of precise inspection equipment.
--A team of senior sales engineers who help end-users solve their problems happened during the design stage to the finish products.
--Customers we served from various industries more than 4,000 including food, beverages, daily chemicals, pharmacy, pulp and paper, coating and painting, oil and gas, biotechnology etc.
We are not satisfied until our pumps have been successfully integrated into your processes and solve your pumping problem. This is our passion!