China Hjs32-630t Four-Column Metal Forming Machine

The series is designed for general-purposes suitable to a wide variety of plastic material press-works such as bending, flanging, sheet metal drawing, and also for straightening and press-fit in wide applications of plastic, rubber, electric-motor, automobile, ceramic ware, metal product, abrasive material, fireproof material, powder and metallurgy industries. If you intend to use it for blanking and punching, a buffer device should be ordered in addition to eliminate or mitigate impact and noise.
Loaded with a stand-alone hydraulic station and electrical cabinet, optional of three operating modes of adjust (inch), manual and semi-automatic.
Working pressure, speed and strokes of quick and slow descent can be regulated in the specified range to meet the required process. Providing two controls of preset stroke and preset pressure, if you choose the preset pressure, the press executes hold-pressure and delay, auto. RAM return after pressing action, and providing hold-pressure with motor run or motor stop as option.
ItemUnitHJS32-400Nominal ForcekN4000Eject ForcekN630Return ForcekN350Max. Working PressureMpa25Ram Strokemm800Eject Strokemm300Daylightmm1250Ram SpeedQuick descent150150Workmm/s7.5~18Returnmm/s210Eject SpeedEject5560Retreatmm/s200Opening Table SizeLeft-to-right12603500Front-to-backmm1300Table Height above Floormm710Overall SizeLeft-to-right284011085Front-to-back20002540Height above Floor41504640Motor PowerkW30