China Hmc Horizontal Multistage Water Pump

Applicatioin
Suitable for use with clean water even where air is present and with liquids that are not chemically aggressive towards the materials from which the pump is made.
The pumps are designed to pump water even in cases where air is present. As a result of their quientness, reliability and low energy consumption they are recommended for use in domestic and civil applications such as the pressure sets, and in rain water recovery and irrigation systems, etc.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Operating Conditions
Liquid temperature up to 60ºC
Ambient temperature up to 40ºC
Total suction lift up to 8m.
Motor
Two-pole induction motor (n=2850 r.p.m)
Insulation Class B
Protection IP44
Continuous service S1
Thermal protector for single phase
Single phase 220V/50Hz, 60Hz if request
Three phase 380V/50Hz, 60Hz if request
Component Construction
Pump body: Cast iron + Stainless steel
Pump support: Cast iron
Motor housing: Aluminum, Alloy for HMC-SD/SE/SF/SP
Impeller: PPO or AISI304 SS if request
Motor shaft: AISI420 SS, or AISI304 SS if request
Mechanical seal: Ceramic/Graphite
Impeller can be PPO and also can be AISI304

ModelPower (W)Max Flow (L/min)Max Head (m)Inlet/Outlet (inch)N.W (kg)Packing size (mm)HMC-3SC110090361.25" x 1.25"15440x210x240HMC-4SC150090481.25" x 1.25"16465x210x240HMC-5SC180090601.25" x 1.25"17490x210x240HMC-6SC110090661" x 1"16.5515x210x240HMC-8SC150090881" x 1"18.5565x210x240HMC-10SC2200901101" x 1"20625x210x240