Features:
1..Triple bearings supporting headstock spindle
2..Adjustable taper roller bearings providing spindle accuracy
3..Precision 'V'-beds & headstock gears are all hardened & ground
4..One piece cast iron base increases rigidity
5.Overload protection on drive motor and coolant system
6.Universal enclosed gearbox incorporating metric & imperial thread capabilities
7.Inching button incorporated on the control panel for convenient spindle speed selection
8.Foot operated spindle brake with safety cut out switch
9.300mm wide induction hardened heavy duty cast iron bed
10.Removable gap bed allowing work piece to swing up to 640mm
11.Chuck guard fitted with safety micro switch
12.Powered longitudinal and cross feeds
13.Adjustable 4 position length-stop mechanism for accurate repetitive operation
14.Dual calibrated dials incorporating metric & imperial graduations
15.Coolant system with flexible hose enabling operator to manipulate flow direction
16.Oil sight glass for head stock and gearbox
17.Low voltage halogen work light
18.Lubrication pump on saddle oiling slides
19.D1-6 camlock spindle for quick chuck removal
20.12 spindle speeds from 25-2000rpm
21.Large 58mm spindle bore
22.5.5kW / 7.5HP 415V main motor
ModelC6246/1500Max swing over bed460mm(18")Max swing over cross slide274mm(10 3/4")Max swing over gap690mm(27 1/8")Length of gap155mm(6 1/8")Max length of workpiece1500mm(60")Width of bed300mm(11 13/16")Spindle noseD1-6Spindle bore58mm(2-1/4")Taper of spindle boreM.T.#6Range of spindle speed12changes25-2000r/minMax travel of compound rest120mm(4 3/4")Maxtravel of cross slide290mm(11 3/8")Leadscrew pitchmetric 6mmMaxsection of tool25mmx25mm(1x1")Range of longitudinal feeds42kinds 0.031-1.7mm/rev (0.0011"-0.0633"/rev)Range of cross feeds42kinds 0.014-0.784mm/rev (0.00033"-0.01837"/rev)Metric threads range41kinds 0.1-14mmInch threads range60kinds 2-112 T.P.I.Diametrical pitches range50kinds 4-112D.P.Module piches rang34kinds 0.1-7 M.P.Dia. of tailstock sleeve60mm(2 5/16")Travel of tailstock sleeve120mm(4 3/4")Morse taper of tailstock sleeveM.T.#4Power of main motor4kw(5.4HP),optional 5.5kw(7.5HP)3PHPower of coolant pump40wPacking size2775x1110x1575mmN.W./G.W.2010/2355 KGS
Standard Accessories:
3-jaw &4-jaw Chuck
Change Gear Set
Reduction Sleeve
Dead Centers
Coolant system
Brake system
Tool box & tools 1 set
Follow Rest
Steady Rest
Optional Accessories:
--DRO
--Quick change tool post
--Chuck Guard