China Horizontal Lathe Machine with CE Approved

Hardened and ground headstock gears
Gapped bedway
Adjustable headstock bearing
Oil-bath lubricated main drive and feed gear
Cast iron bed, double v-guide, hard and ground
Shift gear system to change feed direction
Interlocking feature prevents simutaneous advance of leadscrew and feedshaft
Ce standard
MODELSC0632Ax750C0632Ax1000Swing over bed330mm(13")Swing over cross slide198mm(7-25/32")Swing in gap diameter476mm(18-3/4")Swing in length210mm(8-1/4")Center height166mm(6-1/2")Admits between750mm(30")1000mm(40")Bed width187mm(7-3/8")Bed length1248mm(49-1/8")1655mm(65-1/8")Spindle bore38mm(1-1/2")Spindle noseD1-4" or A2-4"Taper in noseNO.5 morseTaper in sleeveNO.3 morseSpeeds number8 or 16(pole changeable motor) (optional)Speeds range70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor)Cross slide travel160mm(6-5/16")Compound rest travel68mm(2-11/16")Lead screw thread8T.P.I. or 3mm pitchFeed rod diameter19mm(3/4")Cutting tool max section16mmx16mm(5/8"x5/8")Threads imperial pitches36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I)Threads metric pitches28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch)Threads diametral pitches36 Nos.8-112 D.PThreads module pitches22 Nos.0.2-3 M.P.Longitudinal feeds imperial36 Nos.0.0019-0.0273"/Rev.or
(32 Nos.0.002-0.548"/Rev)Longitudinal feeds metric36 Nos.0.050-0.696"/Rev.or
(32 Nos.0.052-0.392mm/Rev)Cross feeds imperial36 Nos.0.0006-0.0094"/Rev.or
(32 Nos.0.007-0.0187"/Rev)Cross feeds metric36 Nos.0.013-0.188"/Rev.or
(32 Nos.0.014-0.380mm/Rev)Quill diameter32mm(1-1/4")(NO.3M.T.) or (optional)Quill travel 100mm(3-15/16")(NO.3M.T.)or (optional)Quill taper NO.3 morseFor main motor1.5KW 3PH or 1PH