China Hospital Use Biphasic Defibrillator Monitor Machine

Hospital Use Biphasic Defibrillator Monitor Machine
Features:
CNME011302, a professional biphasic defibrillator-monitor, meets the requirements of medical professionals in hospitals and clinics worldwide. The compact, durable, and ergonomic design of CNME011302 makes it suitable for emergency use. Proven technologies ensure a robust unit, ready to be used in different environments. With different operation modes (manual defibrillation, AED, pacer, and monitoring mode) you are in control of any situation.
Key Features:
· 4-in-one design including: monitoring, Manual Defib, AED and pacer
· Power on within 2s, Charging to 200J within 3s, ECG recovery within 2.5s
· Up to 360J escalating dose energy to maximize defibrillation success
· Powerful power capacity with battery to support continuous long time monitoring and shocks during transport without external power supply
· Effective IT solution avoiding manual recording, improving efficiency and reducing the workload of clinical staff
Technical Specification:

PhysicalDimensions:
Without external paddles: 295mm (w)x 218 mm (d) x 279 mm (h)
With external paddles: 295 mm (w) x 218 mm (d)x323 mm (h)
Weight:
Main unit:
5.6 kg (including ECG/ defibrillator/ pacing/5pO/ 2Temp/ Resp)
Battery package (each): 0.75 kg
External paddle sets: 0.8 kgEnvironmental and Physical RequirementsWater Resistance: IPX4 (without external power)
Solids Resistance: IP4X
Temperature:
Operating: 0 to 45ºC (Microstream CO2:0 to 40ºC; Sidestream CO2: 5to 35°C)
(at least 60 minutes of working time when the temperature reduces from room temperature to -20ºC)
Humidity:
Operating/Storage: 10 to 95%, non-condensation
Altitude: Operating/ Storage: -381m to+4575m
Shock and Vibration:
Comply the requirements of21.102, IS09919 (Shock and vibration for transport}
Bump:
Comply the requirements of 6.3.4.2, EN1789(Medical devices for use in road ambulances)
Free fall: :
Comply the requirements of 6.3.4.3, EN1789 (Height of fall: 0.75 m)
EMC:
Comply IEC60601-1-2
Safety:
Comply EN/IEC 60601-1DisplayType: TFT Color LCD
Dimensions: 8.4inch
Resolution: 800x600 pixels
Display Waveforms: Max.4 channels
Wave Viewing Time: Max.16s (ECG)Power AC Power
Line voltage: 100 to 240V~(±10%)
Current: 1.8 to 0.8A
Frequency: 50/60 Hz (±3 Hz)
DC Power (through DC-AC Inverter)
Input voltage: 12VDC
Power Consumption: 190W
Battery
Type: 4.5 Ah, 14.8V, recharge able lithium ion battery pack
Number: Max.2
Charge time: 2 hours to 90% and 3 hours to 100% with device off
Capacity Indicator:
5-segment led indicator for fast battery capacity evaluation
Capacity(Two new, fully charged bttery):
Monitoring Mode: ≥10hours, Without recording, typical ECG monitoring, LCD brightness set to 1
Defib Mode: 200 times, 360J discharge at intervals of 1 minute without recording
Pacing Mode: 6 hours, 50Ohm load im pedance, Pacing rate: 80bpm, Pacing output: 60mADefibrillator Wavefom:
Biphasic truncated exponential waveform (BTE) with impedance compensation
Energy accuracy:
±2Jor 15% of setting, whichever is greater, into 50 Ohm
Charge Time:
Less than 5 seconds to 200Joules with a new, fully charged battery
Less than 8 seconds to 360Joules with a new, fully charged battery
Shock Delivery:
Via multifunction defib electrode pads, or paddles
Patient Impedance Range:
20 to 200 Ohm (External defibrillation)
Manual Mode
Output Energy:
1,234,5.6,7,8,9,10,15,20,30,50,70,100,150, 170,200,300,360J
Synchronous Cardioversion: Energy transfer begins within 60ms of the QRS peak
Energy transfer begins within 25ms of the External 5ync Pulse
AED Mode
Output Energy: Userselectable
AED Shock Series:
Energy level: 100 to 360 J, selectable
Shocks series:1, 2, 3, selectable
Default configuration meets 2010 AHA Guidelines
5ensitivity and Specificity: Meets AAMI DF -80Noninvasive PacingWaveform: Mono phasic square wave pulse
Pulse Width: 20 ms, ±5%
Refractory period:
200to 300 ms, ±3% (function of rate)
Pacing Mode: Demand or fixed
Pacing rate: 40 ppm to 170ppm, ±1.5%
Pacing output:
0 mA to 200 mA, ±5% or 5mA, whichever is greater
4:1 pacing:
Pacing pulse frequency reduced by factor of 4 when activated
ECG Monitoring
Lead type:
3 leads ECG, 5leads ECG, 12leads ECG PADS/ PADDLES
Lead Selection:
3Head:l, ll, lll
5-lead: l, ll, lll, aVR, aVL, aVFV
12-lead: l, ll, lll, aVR, aVL, aVF, V1 to V6
Pads/Paddles
HeartRate Display:
Adult: 15 to300 bpm
Pediatric: 15 to 350 bpm
Neonate: 15 to 350bpm
Resolution: 1 bpm
Arrhymia: Yes
Alarms: Yes
ECG size:
2.5mm/mV(x0.25), 5mm/mV(x0.5), 10 mm/mV(x 1), 20 mm/mV(x2), 40m m/mW(x4)
Sweep speed:
6.25mm/s, 12.5 mm/s, 25 mm/s, 50mm/s
Patient Isolation (defibrillation proof):
Type CR: EG, RESP, TEMP, SpO2, NIBP, IBP
Type BF: CO2 and external defibRespiration
Technique: Trans thoracic impedance
Range:
Adult:0 to 120 rpm
Pediatric, neonate:0 to 150 rpm
Resolution: 1rpm.Spo2, Pulse Oximetry
SpO2
Range: 0 to 100%
Resolution: 1%
PR Range: 20 to 254 bpm
Masimo SpO2
Range: 1to100%.
Resolution: 1%
PR Range: 25 to 240bpm.
Nellcor SpO2
Range: 0 to 100%
Resolution: 1%
PR Range: 20 to 300 bpm