China Hot Foil Stamping Machine

Non woven foil stamping machine:
As the non-woven bag is expanding in the global market, the traditional screen printing is inefficient and the printing effect is not beautiful. Although the color-coated non-woven bag has high efficiency and beautiful color, it is not environmentally friendly in the production process and can not be decomposed after the bag is used, which pollutes the environment, and the printing cost of small-order products is too high. Therefore, our company Wenzhou UBIQUE Industrial Co., Ltd. has introduced a special non-woven foil-to-foil bronzing machine suitable for the special process of non-woven fabrics.
Parameters:
ModelU-FS1200Foil stamping speed40-50pcs/minStamping plate size300x500mm * 2pcsMaximum material width1200mmMaximum material diameter1300mmPower apply380v 3phase 50/60hzTotal power22kwOverall dimension6000x2000x1900mmTotal weight4000kgFeatures:
1. Simple operation: only one person can complete the rapid version change, automatic up and down non-woven fabric foils.
2. Full effect of bronzing: non-woven bronzing is different from paper bronzing. Non-woven fabrics have grooves, so the general gilding machine non-woven paper into the groove, and the special structure of the Youbico gilding machine ensures that every gilding is full and complete.
3. NC version adjustment: The traditional stamping machine's stamping plate is glued to the heating board, which requires a high level of sticking technology. The sticking plate is not allowed to be removed and re-pasted. The bronzing plate of Youbico bronzing machine can be adjusted freely in the longitudinal direction in the form of a slot, and the transverse direction can be positioned automatically only by inputting a number controlled by a motor.
4. Saving gilding paper: Ubico gilding machine for non-woven bags gilding process, generally in the front and back of the bag will be gilding different patterns, if a set of gilding paper traction device, will waste small patterns of gilding paper, so we use two sets of independent traction device for gilding paper, each set size according to demand, and for the same gilding surface. In order to avoid the waste of gold stamping in the middle of the pattern, we use two-stroke alternating tape programming to effectively use the gold stamping paper.
5. Gold-stamping paper double-winding: We adopt one-side double-winding scheme for gold-stamping paper roll-up. Because the maximum diameter of gold-stamping roll is about 150 in the market, the use time is short, frequent change of roll-up will reduce the work efficiency, so we adopt double-winding scheme, once one set of rolls is full, we can directly use another set of roll-up.
6. The contact time of hot stamping can be adjusted: on the premise of ensuring the effect of hot stamping by special calculation, the contact time of hot stamping can be shortened as far as possible, so as to increase the speed of hot stamping. It can be easily accomplished by the closing time of the touch screen device.
7. Structural stability of the whole machine: Foundry technology is used in the force part of the main machine to ensure the stability of the machine under high pressure, and independent four-lead pillars to ensure the balanced movement of the platform.
8. Intelligent lubrication: In order to ensure the lubrication of key parts, we use automatic refueling device, which automatically refuels the equipment at regular intervals. When the tank level is lower than the lowest level, the alarm prompt is automatically given.