China Hot Melt Adhesive Chemicals of Furniture Making for Edge Banding

Hot melt adhesive chemicals of furniture making for edge banding

Product Description

Hot-melted adhesivePROPERTIES

Good melting properties

No stringing High green strength Good thermal stability, Good wetting properties

APPLICATION

Hot-melted adhesive, designed for Edge-banding applicationPROPERTIES

CONDITION

The HM adhesives should be used on any type of continuous edge banding machine.
Coating can be made either on the edge or on the section material.
The coated material is immediately placed in contact with the substrate and pressed with rolls.
Application temperature: 190-200°C
(The temperature should be checked directly in the gluing system)
Coating weight: 40-100g/M2 (Depending on edges nature and substrate)
Coating speed: 10-25m/min
The supports and edges must be at ambient temperature(which should not be less than 15°C)
and the level of humidity should not exceed 10% in order to obtain a good bond.
SUGGESTION

1 should not be mixed with any other type of adhesive.
2.The cover of glue tank should be closed lest the adhesive might be polluted.
3.If the plant line stops for over 2 hours,The glue temperature should be tuned down .
SAFETY

1.Wear goggles and adiabatic gloves when filling hopper or pot.
2.Keep plant ventilative and forbid any fire.
3.Consult MSDS and read "cautions" before used
STORAGE

24 months in its original package at an average temperature of 25°C or below. Store in a
clean, dry area. Keep containers closed. Storage temperature should not exceed 35°C.

EXHIBITIONS:
If you have any questions, please feel free for contact with us!

Lina
Sales Manager
Address: NO.566 Huaxu R.D., Xujing Economic Development Zone, Qingpu
Shanghai Rocky Adhesives Co.,Ltd.
Tel:+86-21-59761668 Cell phone :+86 136 6195 9280

Fax:+86-21-59761668-204
Web: www.shrocky.com www.china-rocky.com