China Hot Mounting Compound for Metallography Metal Sample Preparation

Product Description
Item NoDescriptionBenefitPackageTM-2235TRANSPARENT, AcrylicTransparent,easy released.1-25kg/1pkgBB-2232EDGE retention use -Black(grit)Provide good contrast and edge protection perfomance,Low grinding speed.1-25KG/1pkgPT-2231Daily use -Black(Grit) phenolic thermoset resinFor daily sample preparation, quick grinding,economical.1-25KG/1pkgPT-2233Daily use -White(powder)phenolic thermoset resinWhite powder, daily use,quick grinding speed.1-25KG/1pkgDP-2236DAP,black gritDAP, good edge retention1-7.5KG/1pkgEP-2237EPOXY EDGE retention -Black(grit)EPOXY,excellent edge retention1-7.5KG/1pkgDC 2239Graphite CondcutionGood conduction,for SEM1-7.5KG/1pkg
Tips:You can minimize shrinkage and improve edge retention by cooling the mount to room temperature under pressure before removing it from the mounting press.Uncured mounts can be caused by too much moisture in the mounting compound. Make sure to properly close the container between uses.Radial splitting of mounts is often caused by sharp edges on the sample or by samples that are too large for the mold. Round off sharp corners and move the specimen farther from the edge of the mount.Bulging or soft mounts are caused by insufficient cure times. Increase the cure time.Alarm indication to the operator on completion of Cooling Cycle to take out the mouldUnfused or frosted mounting compound is often a sign of insufficient molding temperatures or pressures. Ensure the temperature and pressure settings on the mounting press match the recommendations for the compression compound being using.
Epoxy and Acrylic castable mounting systems are recommended for mounting specimens that are sensitive to high pressures and temperatures.Epoxy mounting systems provide good physical adherence, low shrinkage and
excellent infiltration into pores and cracks.Acrylic mounting systems are typically selected for their short cure times.Dyes and fillers can be added to either system. Dyes can enhance pores and highlight the interface between the
media and sample. Conductive fillers allow epoxy mounting systems to be used in an SEM without additional processing.Fillers can improve the abrasion resistance of all castable systems.
Payment & Shiping
RFQ
1, Min. Order Quantity
1 piece is OK.
2. How about your technical team construction?
We have professional technicians team with 10 years' experience.
3, What's our warranty?
12 months
4, Ways of payment
T/T, L/C, Pay pal, Western Union
5, Ways of shipment
EXW, FOB, DHL, FedEx, or upon your requirements
6, Are you a trader or manufacture?
We are manufacturer, owns our factory in Suzhou.
7, Can you accept OEM or ODM?
Of course,Logo is also acceptable
8, What is the delivery time?
No special requirements, can be delivered within 3 days. For customized models, delivery time shall be discussed and confirmed according to order
Contact