China Hot Seller 120mm2 PVC Insulated Power Cable

Hot Seller 120mm2 PVC Insulated Power Cable
1. Main application
This cable is suitable to be installed in transmission and distribution lines of rated voltage up to and including 0.6/1kV. The mechanical and electrical properties of these cables are accordant with GB/T12706-2002 Power cables extruded insulation and their accessories of rated voltages 1kV(Um=1.2kV)up to 35kV(Um=40.5kV)and IEC60502-1997 Extruded insulation power cables and appendices for rated voltages 1kV up to 30kV.
2. Properties of products
2. 1 Max. Continuous operating temperature of conductor is 70° C.
2. 2 Max. Short circuit conductor temperature (max. 5 sec) 160° C.
2. 3 The installation temperature should not over 0° C, if the ambient temperature is lower than 0° C, the cable should be preheated, the bending radius of cable should not less than 10-15 times
Standard:

TypeDescriptionApplicationCuAlVVVLV
PVC insulated PVC sheathed power cable
Suitable for indoor, channels, conduits. Unable to bear mechanical stress.VYVLY
PVC insulated PE sheathed power cableVV22VLV22
PVC insulated steel-tape armored PVC sheathed power cable
Suitable for under ground, can bear mechanical stress, but can not endure large pulling force.VV23VLV23
PVC insulated steel-tape armored PE sheathed power cableVV32VLV32
PVC insulated fine steel-wire armored PVC sheathed power cable
Can be installed in vertical well, and bear large mechanical pulling force.VV42VLV42
PVC insulated steel-wire armored PVC sheathed power cableVV33VLV33
PVC insulated fine steel-wire armored PE sheathed power cableVV43VLV43
PVC insulated steel-wire armored PE sheathed power cable

FAQ:
1. How many years has Henan Jiapu Cable Group been in production?
Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China
2. What kinds of products does Jiapu Cable manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;
3. What kind of certifications do you have?
SABS, CE, ISO9001-2000, SGS
4.Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.
5. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.
6. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.
7. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.
8. Do you supply the customers with installation service in foreign country ?
We don't have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.