China Hot-sale Single boom Hydraulic Drilling Jumbo for Underground Blasting Hole

Hot-sale Single boom Hydraulic Drilling Jumbo for Underground Blasting Hole
1,FC30-1BCD hydraulic Drilling jumbo is mainly used to drill blast holes for tunneling constructions in mining, metallurgy, water and electricity, railway, highway engineering, etc.
2,This series use all hydraulic drive, auto parallel telescopic boom make promote working keeping parallel, with high efficiency and drilling speed can be 0.8-2m/min.
3, It use rubber wheels, can transfer very convenient, speed can be 8Km/h. The advanced hydraulically controlled drilling system, which is safe and easy to operate, incorporates the auto-stop and anti-jamming function, auto-stop at end-point, auto-wash, can improve the working environment a lot, reduces noise, dust and energy consumption.
4,This jumbo has a small body, compact structure, low gravity center, flexible, working smoothly, runs with the crawler, can climbing flexible on 14°slope. The flexible hydraulic rock drill can work on the section, roof, side and floor.

Configurations and Technical parameter

Body
Overall size (LxBxH): 12000x1800x2900 mm
Hole diameter: Φ43 ~Φ76 mm
Hole depth: 3350 mm (Standard)
2700 mm (Option 1)
Drilling speed: 0.8~2 m/min
Section (BxH): 3.5x3.5~7x6.5 m
Rock drill model: HYD300 Positive shank
Rock drill impact frequency: about 12 KW
Service voltage: 380 VAC 50 HZ
Total power: 62.2 KW
Total weight: ≈10500 KG
Running chassis
Chassis structure: Box welding body
Running form: Crawler track
Drive form: Hydraulic motor
Diesel: DCEC CUMMINS
Diesel power: 82 KW (2200r/min)
Running speed: Diesel 0-4 Km/h
Electric machine(Not recommend) 0-1.5 Km/h
Brake type: Brake when lost of pressure
Departure angle: 15°
Approach angle: 15°
Ground clearance: 130 mm
Gradeability(smooth-riding surface): 14° (25%)
Min. turning radius: 4500 mm (inner side)
Arm
Arm structure: Hydraulic auto parallel telescopic boom
Rise and Fall: Up 60° Down 20°
Lifting translation: Down 60° Up 20°
Arm swing: Left 35° right 35°
Arm swing translation: Left 35° right 35°
Reverse: Positive 180° Reversed 180°
Pitching: Down 93° Up 12°
Arm stretch: 1500 mm
Compensative travel: 1500 mm (standard)
Thruster
Total length: HYD300 Positive shank
5180 mm (standard)
4420 mm (Option 1)
Drill pipe length: 3700 mm (standard)
3090 mm (Option 1)
Hole depth: 3350 mm (standard)
2700 mm (Option 1)
Max Propulsion: 9 KN
Air system
Air compressor: Piston type air compressor
Gas displacement: 2100 L/min
Working air pressure: 0.6~0.8 Mpa
Drill lubrication air volume: 200 ~300 L (0.2 ~0.3 Mpa)
Water system
Water pump: Multi-staqeturbocharqed ntrifuqal pump
Rock drill water pressure: 0.8~1.2 Mpa
Colder entrance water pressure: 0.3~0.6 Mpa
Other configuration
Cable reel: Hydraulic drive (60m)
Hydraulic oil tank cooling type: Water-cooling
Lighting: 5 high brightness LED lights
Extinguisher: Hand-held dry powder fire extinguisher (1Kg)
Should you have interest in our product, pls contact with us immediately! Thank you.