China Hot sale high speed wire nail making machine

Hot salehigh speed wire nail making machine

The machine's main characteristics are as following:

1.Shorter stroke (12mm), traditional machine around 100mm

a.Stable performance, defective rate less than 1/100000

b.Lower mechanical wear

c.Gripping dies and punches are more durable.

2.The nail length can be well controlled.

a.The machine equipped with sensor for detecting longer or shorter nails

b.Active wire feeding, can ensure straight shank and consistent length, no matter what the wire coil's weight is.

3.metal scraps can be separated with nails very well

a.Effectively protect the nail conveying belt

b.Ensure the good shape nail head

4. High quality nails: consistent nail head and shank length (tolerance 0.5mm), defective rate 1/100000, which is very good for coil nail collating and strip nail making.

5. Easy operation and high efficient: the machine is fully automatic and runs stably.

6. Low use-cost and tooling cost.

7. Automatic oiling system with oil pump

8. With seven alarming sensors to protect the machine and ensure the nail quality

9. Low maintenance cost

10. Save energy and labor cost

Hot salehigh speed wire nail making machine parameters list

Model numberSSS-ZDJ-X50SSS-ZDJ-X90SSS-ZDJ-D90SSS-ZDJ-X130SSS-ZDJ-X150nail diameter1.9-3.0mm2.0-3.5mm2.0-3.5mm2.4-3.8mm2.5-4.8mmnail length30-60mm30-90mm45-90mm50-130mm70-150mmSpeed≤ 800 pcs/min≤ 760 pcs/min≤ 680 pcs/min≤ 680 pcs/min≤ 700 pcs/minRated power7 kw7 kw7 kw7 kw14 kwDimensions1350*850*1170
1500*800*16001350*1220*1050
1500*800*16001350*1220*1050
1500*800*16001550*1220*1050
1500*800*16001650*1250*1300
1500*800*1600Machine weight2200kg2800kg3000kg3500kg4500kg

Packing & Delivery

Certificate

Our Company

FAQ

1. Time for changing nail sizes ----> If only adjust the length of nails and keep the same wire diameter. 3-5 minutes is enough. If the nail diameter also need to be changed, then around 20 minutes will be needed for adjusting the feeding unit and gripping dies.

2. The lifespan for nail cutters, gripping dies and punches. ----> Normally two months. It depends on the operator’s proficiency

3. The material for nail cutters, gripping dies and punches. ----> Tungsten Carbide with alloy steel.

4. If there is some problems during machine running, what technical support can be provided? ----> Video technical support and online service can be provided.

5. The tolerance for nail length ----> ± 0.25mm.

6. Installation service ----> We can send engineers to your company for machine installation. The round trip flight tickets, local transportation, local accommodation should be paid by your company. Engineer service charge is US$100/day.

Contact Us!

Hot salehigh speed wire nail making machine