China Hydraulic Punch Shear Machine Ironworker

These universal machines are supplied with standard tooling including repetition support tables at punch,shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations.Comprehensive safety guards are fitted as standard on all work stations. Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilization , the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations. The system gives accurate power inching at all five work stations and

allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement. An optional 'Production Pack' is available to enhance the machine specification, this includes: 1 low volt halogen lamp on a movable magnetic base, 1.0 m long touch and cut ruled length stop,fine adjustment facility to the punch stroke and measuring scales in the notch table.

Features
- Large punch table with multi-purpose bolster - removable table block for overhang channel / joist flange punching.

- Punch table, shear table and notch table standard equipment

- Non-tiltable and as thus wear-free angle-cutting blades.

- Power inching and adjustable strokes at punch & shear end.

- Centralised pressure lubrication.

- Wide variety of applications - for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications

- Large throat depth at the punching station - extra deep throat models available.

- Mitre cut flanges of angle under shear blade.

- Alternative rectangular/vee notching facility.

- Work station guards standard fitment.

- Two cylinder operation.

- Overload relief on hydraulic system.

- Interchangeable bearings, seals and valves readily available from

stockists of hydraulic equipment.

- Machines with very low maintenance requirements.

Application:

MODELMULTI 60MULTI 70MULTI 80MULTI 95MULTI 125MULTI 175RATED CAPACITY60T70T80T95T125T175TPUNCHINGHole Punching(D x T)28x1526X2028X2027X2532X2540x32Max. hole punching(D x T)57x857X957X1057X1257X1657X22Stroke555555808080Standard depth of throat305305305355355625Extend depth of throat625625625625625625Max. hole size575757575757Max. hole size160160160160225225Max. section steel305305305305305380SHEARINGMax. thickness for plate230x20300x20300x20380x20380x25380x30Max. width for plate375X10375X15450x15480x15600x15600x20Cut corner in angle steel, Max. 45 degree100x15100x15100x15120x15120x15125X15ANGLE CUTTING90°130x13130x13150x13150x15150x18200x2045°70x1070x1070x1080x1080x1080x10SECTION CUTTINGRound steel/Square steel454545505565/55Channel steel/H steel130x65130x65130x65160x90200x100200x100T steel*90x1290x1290x12100x12120x12150x15NOTCHINGPlate thickness101012121216Width-rectangle454540526060Depth-rectangle909090100100100Depth-V shape606060708080Cut edge100x10100x10100x10100x13100x13100x14ConER NOTCHMax. corner cutting ability250x6250X6250x6250X6250x6250X6TUBE NOTCHMax. outside diameter for tube838383108108165BENDINGflat steel bending250x12250x13250x13250x20250x22250x25plate bending500x3500X3500x3500X3700x3700X4PUNCHING AT NOTCH STATIONDepth125125125125125125Max. ability38X738X838X838X1038X1238X13TECHNICAL DATAPower for main motor5.55.57.57.57.511Net weight for machine157016201925273031005550Machine size (L x W x H cm)164X71X178164X71X180190x79X191190x79X191200x80x203270x112X216