China Hygienic Diaphragm Valve Ball Valve Pneumatic Valve

Sanitary Weldped U-type diaphTag & Sign ragm valveConnection mode: Welded. Our company also offers sanitary stainless steel manual U-type tee welded diaphragm valve.Standard:SMS.Our company offHeater & Heat Exchanger ers other standard, such asIDF, 3A, DIN.The parts of valve:an actuator, diaphragm and body which assemble together with bolts and nuts.Sanitary Stainless Steel Manual U-Type Tee Welded Diaphragm Valve'sactuator is manual. The body is three way.Application:
RG diaphram valve is a series of sanitary diapgram valve, it is widely used on wine, dairy products, beverage, foodstuff industry, pharmacy etc. Achieving the requirement of control and open/close for the pipeline system.Work principle:
The diaphragm is close under normal state, and that moment the diaphragm clung tho the valve body cavity, and closing off the flow path through the pipeline. When the diaphragm valve have the requirment to clean or open. The valve stem moves upwards according to the manual or pneumatic actuator equipment, spherical diaphragms naturally nemd upwards, so that the valve is open and reach the requirement of clean and open. The diaphragm make the lower body cavity and the upper chamber separted from the valve cover, so that the stem at the top of the diaphOscillator ragm, disc media and other parts from corrsion, eliminating the need for packing structure, and no media leaks, the optimize valve body made the cleaning liquid flow out totally, so that don't have any entrapment.Material:
Steel componens: Stainless steel 304, stainless 316L
Seal: EPDM+PTEE the seals are imported seal material (which conform to the FDA177.2600standard). With NUOMENG unique technology,will be a bolt coupling nut with EPDM/PTFE perfect combination into a whole sealing parts,the sealing parts contact with the media of the parts of the PTFE material has good cold resistance(-25ºC) excellent heat-resistance(+250ºC)Roadway Safety of all sorts of chemical preparation is well tolerated and excellent wear resistance to flow.Standard Design:
Standards:DIN,3A,SMS,ISO/IDF,BS/RJT,ASME/BPE etc.
The parts of valves: an actuator,diaphragm and body which assemble together with bolts and nuts.The entire valve assembly in meticulously.The actuator can be manual and pneumatic,the diaphragm made of artificial rubber which can have all kinds of soft and hard degree.The body can be two way or three way.
Connection:clamp,weld,T-type tee,U type tee etc.
SMS-NO.RG0024SizeAIBRCDETH193/4"1238016128.58193/103.519.051.518251"14690191.533.5101.593/103.525.41.523321.25"1809021338123107/124.531.81.528.5381.5"20110023248.5132107/124.538.11.530512&Hydraulic Press quot;24211026760.5157129/151.550.81.538