China Hyrl 1739 High Speed Rapier Loom with Electronic Jacquard

HYRL 1739 High Speed Rapier Loom
HYRL1732 rapier loom is a digital control high speed rapier loom, the newly production 2015 from CHTC and wiltoptex, has the characteristics of high-speed, high efficiency, high automation, energy saving etc, this machine has the international mainstream models of perfect function, using modular design concept, simple structure, convenient operation, suitable for cotton, wool, linen, silk, mixed fiber high speed weaving ,are widely used in apparel fabrics, decorative cloth and industrial cloth weaving areas.

1:RIGID ConSTRUCTIO

Two cast-iron side frames connected by sturdy cross-members. sley is driven by 2 sets of conjugated cams with cam followers below the fabric. Additional sley cam units are mounted in case of very wide weaving. The sley with its reed holder-made of light alloy with great stiffness-is perfectly balanced by meas of counterweights and provides powerful beat-up.

This results in uniform fabric characteristics over the whole width and makes it possible to weave heavier fabrics.

2.The rapier head motion optimization

Optimization design of spatial four lever linkage mechanism, which makes the optimal weft insertion, change the weft tension minimum, better adapt to high speed weft insertion, improve production efficiency. Weft shuttle channel can be equipped with a hook guide system and free flight system.

Main specification:

Reed width

190cm

210cm

230cm

280cm

360cm

Max. weft inseration rate (m/min)

530-685

588-714

644-782

650-875

750-1008

Speed (rpm)

500-550

500-550

480-530

450-500

400-450

Yarn range

Cotton6NE-80NE,wool 10Nm-135Nm,chemical fiber 900D-70D

Shedding

Mechanical dobby or electronical dobby

Weft insertion form

Separate reeds positively driven by conjugate cams at both ends

Beating-up motion

Separate sley bars positively driven by close conjugate cams at both ends

Let-off motion

Contionous let-out of warp by compound regulating system

Take-up

Positive continuous take-up motion with weft density regulators

Weft selection

Electrical color choosing device; max.8 weft colors.

Diameter of warp beam

800 mm or 1000mm

Warp stop

6 rows electric warp stop

Weft stop

With piezoelectric sensor control weft stop

Power consumption

4.8KW