China ISO 9001 SBlasting Shot Peening Surface Preparation Surface Treatment Steel Grit with SAE

ISO 9001/Sand Blasting/Shot Peening/Surface Preparation/Surface Treatment Steel Grit with SAE
1.Production picture
2.Production Description
1.Honest Horse " brand are highly praised and well appreciated by domestic and overseas customers for good quality
2.we have competitive prices and good after-sale services.
3.In 2006 we invested a lot of fund to buy new intelligent NC automatic production equipment
4.establish a new 50,000-square-meter plant.
5.our annual production capability can reach 50,000MT.
Steel grit Size: G10,G12,G14,G18,G25,G40,G50,G80,G120
Diameter:0.2mm,0.3mm,0.5mm,0.6mm,0.8mm,1.0mm,1.2mm,1.4mm,1.7mm,2.0mm,2.5mm
3.Specification

ProjectQualityChemical composition%Cr0.26%Si0.4-1.2%Mn0.6-1.2%S<0.05P<0.05Hardnesssteel shotGP 41-50HRC;GL 50-55HRC;GH 63-68HRCDensitysteel shot7.6g/cm3

4.product process
5.Steel grit test report
6.Steel grit Applications
1. Fettling cleaning the casting sand and burnt -on sand of the casting to make the surface get good cleanliness and required roughness, so that can be benefit to the subsequent processing and coating.2. Steel Plate Surface Preparation Cleaning the oxide skin, rust and other impurity by shot Blasting, then using the vacuum cleaner or the purified compressed to clean up the steel products surface.3. Engineering Machinery Machinery cleaning can effectively remove the rust, welding slag, and oxide skin, eliminate the welding stress,and increase basic binding force between rust removing coating and the metal ,thus greatly enhancing the derusting quality of engineering machinery spare part.cleaning removing the oxide and the attachments achieve the requested rust removing grade and the 4. Stainless Steel Plate CleaningTo achieve clean, luminous, exquisite burnish surface treatment of stainless steel plate, it is a must to select the suitable abrasive materials to remove the scale from cold rolled stainless steel surface. According to different grades,the stainless steel surface needs to select different diameter abrasives and proportion to process. Compared to the traditional chemical process, it could lower the cleaning cost and achieve green production5. Steel Structure Steel structure,H section,C section and angle steel are widely applied in the modern construction industry. They all need rust and oxide skin removal treatment to achieve the good anti-corrosion property and aesthetic property.6. Pipeline Anti-Corrosion The steel pipes need surface treatment in order to strengthen the corrosion resistance. By polishing grain depth. Not only cleaning surface but also satisfy the adhesion between steel pipe and coating, achieve good anti-corrosion effect.7. Body Section The metal abrasives quality used for sand blasting body section directly affect the quality and comprehensive cost factor in terms of the sand blasting efficiency,girder coating, painting, kinetic energy and abrasiveconsumption. Withthe new coating protection performances standard (PSPC) release, there is a higher request to the piecewise sand blasting quality. Therefore, the metal abrasives quality is very important in the sand blasting.
7.Steel grit package

1.25kg/bag(pp bag or paper bag) then 40 bags in one ton bag/pallet ,
2.one ton one bag
all packages are lined with waterproof materials
We can also pack according to your requirement.
8.Our service
1.we can supply sample for free.
2.Customized Service
a.Product---We can produce various size abraisve according to the customers' requirements.
b.Package---The products can be packaged as customers' requirements.
3.After-sales Service
a.Our products passed ISO9001 standard, and we control the testing procedure strictly.
b.If there are quantity problems,package problems,delivery problems,or any other problems,our
company will seriously investigate the event and give customers a satisfying reply.
9.FAQ
1.Our payment terms:
a.T/T 50% advance payment then the rest 50% payment pay us when get the scanned B/L from our E-mail
b.L/C 100% irrevocable L/C at sight
2.Delivery time:
3-5 work days after get the advance payment
3.Advantages:
13 years exprierence
SAE ISO9001 certificate
on-time shipment
support after-sale service
10.OUR MINE PRODUCTS:
1.Bearing steel grit
2.Cast steel grit
3.Steel shot
4.Low carbon steel shot
5.Steel cut wire
6.Garnet sand
7.Glass beads

We welcome customers visit us any time