China ISO Series PWM Pulse Transformer

ISO Series PWM Pulse Transformer (ISO D-P-O-Q)
Application:
Convert the Pulse Width Modulated PMW signal isolation to the corresponding 4-20mA or 0-10V analog signal.
PWM signal transfer/isolation/long-term transmission
Industrial PLC control and inverter control
Ground interference control
Automatic selection control of industrial boiler furnace.
Characteristics:
Sensitive distinguish, Rapid response
Extremely high linearity in full measuring range (Non-linearity<0.2%)
Power source/input signal/output signal 3000VDC isolated
Power: 5V/12V/15V/24V DC supply
Small size, low cost, SIP-12, complian with UL94V-0 standard anti-fire package
Strong spatial interference characteristics of anti-EMC electromagnetic interference and high-frequency signal.
Industrial Temperature range: - 20 ~ + 50 grade. C.
Summarize:
SunYuan ISO D-P-O series PWM pulse transmitter is a duty cycle of the PWM pulse width modulated square wave signal through the isolation convert hybrid integrated circuits for analogue standard signals. The product is integrated on the same chip with high isolation DC / DC power supply circuit, the PWM drive circuit, high-speed converter and signal amplification and conversion circuits, etc., especially suitable for industrial process instrumentation, signal isolation transmitter. Currently widely used in the industrial field in the remote control.
ISO D-P-O internal integration of high efficiency DC-DC isolated power supply to the IC internal input conditioning circuit and output conditioning circuits, the conversion circuitry. SMD process structures and new isolation technologies allow the device to achieve: Power, signal input / output 3000VDC isolation. And meet the industrial wide temperature, humidity, vibration adverse work environment requirements.
ISO D - P- O- Q
Input signal
D1: 50Hz-99Hz
D2: 100Hz-0.9 kHz
D3: 1kHz-9kHz
D4: 10 kHz-19 kHz
D5: 20 kHz-50 kHz
D8: User define
Power supply
P1: DC24V P2: DC12V
P3: DC5V P4: DC15V P8: User define
Output signal
O1: 4-20mA O2: 0-20mA O4: 0-5V
O5: 0-10V O6: 1-5V O8: User define
Response Time
Q01: 100mSec Q05: 500m Sec Q1: 1Sec Q2: 2Sec Q3: 3Sec
Product Model choose example:
E. G. 1: Input: 20kHz; Output: 4-20mA; 100mSec response time; Power supply: 24V;
Corresponding Model: ISO D5-P1-O1-Q1
E. G. 2: Input: 50Hz; Output: 0-5V; 3Sec Response time; Power supply: 12V;
Corresponding Model: ISO D1-P2-O4-Q3

D:Input signal P:Power supply O:Output signalQ:Response time D1:50Hz-99Hz P1:DC24V O1:4-20mA Q01:100mSec D2:100Hz-0.9KHz P2:DC12V O2:0-20mA Q05:500m D3:1KHz-9KHz P3:DC5V O4:0-5V SecQ1:1Sec D1:10KHz-19KHz P4:DC15V O5:0-10V Q2:2Sec D1:20KHz-50KHz P8:User define O6:1-5V Q3:3Sec D8:User define O8:User define