ISO standard ABC Dry Powder Fire Extinguisher 1kg
·ISO 9001 certified quality management system
·Suitable against class A(carbonaceous, B(flammable liquid), class C(flammable gas) and live electrical fires
·All fire extinguishers must be serviced in accordance with BS5306
·Polyester powder external coating
·All fire extinguishers are tested no leakage
·Brand name: Pri-Safety
Capacity1Kg2Kg2.3Kg3Kg4Kg4.5Kg5Kg6Kg8Kg9Kg12KgItem No.FMZL1FMZL2FMZL2.3FMZL3FMZL4FMZL4.5FMZL5FMZL6FMZL8FMZL9FMZL12Out-dia.(mm)90110110130140140150163163180180Cylinder Length (mm)235310350320375420400410505490320Volume (L)1.22.422.753.554.95.455.957910.713.5Full Weight(kg)23.43.84.66.477.79.21213.617Temperature Range-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºC-30+60ºCWorking Pressure(bar)1414141414141414141414Testing Pressure(bar)2727272727272727272727Fire Class(ABC40%)5A 21B C8A 34B C8A 34B C13A 70B C13A 89B C13A 89B C21A 133B C27A 144B C27A 183B C34A 183B C43A 233B CPacking Size(mm)400x
200x350360x
250x400290x
290x375140x
150x400150x
160x430150x
160x495160x
170x510170x
180x510170x
180x610190x
200x600190x
200x710Quantity/CTN(pcs)86411118641Quantity/20ft(pcs)80004500350032002600230020001800145012001000
Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used