China Impeller SWashing Machine Wheeled Type SWashing Machine

Introductions of XSD Wheeled Sand WahserSand Washing Machine Application:
XSD Wheel Sand Washing Machine(sand washer) is widely used in particle aggregate sand screw washing, grading and dehydrating quartz and sand in construction site, sand stone factories, hydropower station and concrete dam site, precast concrete factory, glass factory and etc. It is especially applicable to wash construction sand and paving sand.
Features of sand washing equipment:
1. This machine's structure is simple. The impeller drive device is separated with water and the watered materiel avoiding that the bearing is damaged by deeping in water, sand, or contamination.
2. This machine has obvious advantages compared with screw sand washing equipment/washer.
3. The medium and fine sand are washed away less. The washed construction sand's gradation and modulus of fineness can get the standard which is regulated in national ' construction sand' and ' construction scree and gravel.
4. There is almost no wearing part except screen mesh.
5. The machine usage life is long.Operating principle of artificial sand washer (Bucket sand washer):
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Main Technical Data of XSD Wheel Wahser
Model
(mm)
(mm)
(t/h)
(KW)
(mm)
Impellerdia
Feedingsize
Capacity
Power
Dimension
XSD2615
2600x1500
≤10
30-80
7.5
3320x2200x2670
XSD3016
3000x1600
≤10
80-160
18.5
4500x3206x3480
XSD3500
3500x1000
≤10
120-600
11
4420x2930x3800

Note: Specifications may change without further notice.