China Indoor RGB LED Module

1)High-precision optical design of LED, each pixel is integrated by RGB LED chips.

2)Perfect color mixing efficiency: rational design on reflector and chip arrangement makes RGB colors mixed and condensed sufficiently and creates no granular sensation.

3)Good performance in flatness, uniformity, consistency and clarity.

4)The raw material of all of the outdoor products including LED chips, mask, glue, and steel cabinets have the ability of enduring high temperature and high humidity, and being anti-UV, waterproof, anticorrosion and antirust.

5)Every production process is well controlled and all of the electronic components are covered by 2mm Tri-Guard Lacquer to ensure no oxidation, no rusty and no moisture. Five-Guard Lacquer will be used for special requirements.

6)Large viewing angle, up to 100°horizontally and 100°vertically, with no image distortion and no color cast at any angle within this range.

7)All of the cabinets are tested by flush, shower and soaking, to ensure the waterproof grade of front side to be IP65.

Pixel Pitch3mmPixel Composition1R1G1BPixel Density111,111dots/m2Module Resolution64*32 PixelsModule Size192*96mmCabinet Resolution256*256 PixelsCabinet Size768*768mmDrive ModeConstant CurrentScan Mode1/16 ScanningBrightness3500~5000cd/m2Max. power consumption<2000W/m2Best Viewing Distance>3mControl MethodSynchronous or AsynchronousViewing AngleHorizontal:100° Vertical:100°Kinds of Color68.7 billion kindsGray Scale12bitRefresh Velocity60 frame/secRefresh Rate> 450HZWaterproof GradeIP43Life Time100,000 hoursDisplay MTBF10,000 hoursBlind Pixels Rate< 0.0003Working VoltageAC110V or 220V±10% 50~60HzOperation Temperature -25°C to +45°COperation Humidity10% ~ 90%RH