China Industrial Automatic Folding Stacking Doors

industrial automatic folding stacking doors (HF-2018)
Product Description

Main technical parameters
Door curtain material
0.8-1.2mm PVC high-density coated fabric imported from French
Door curtain color
Blue, yellow, orange, grey, red and other color as you need
Door frame material
Galvanized steel, aluminum alloy, stainless steel
Track & Box cover
Using 2.0mm thick galvanized steel fold surface
Drive System
Domestic SNMA or Germany SEW motor 380V or 220V/50Hz 0.75kw,1.1kw,1.5kw
Control System
PLC (Kewei brand Misubishi technology or Holip )

Inveter ( Danfoss)



More accurate ,more stable
Opening Way
Double-side radar, double-side press button, infrared sensors
Transparent window
use transparent PVE film imported from Japan
manual rocker
when power failure, manual rocker can be used
Dynamical systems
Adopt high-tech motor reducer:0.75-2.2KW, which according to your door size

High Speed Rolling Stacking Door
HIGH SPEED ROLLING STACKING DOOR
Door leaf: 1.0mm high density polyester fiber imported from France. Yellow, blue, orange, white, gray and half-transparent yellow can be selected. Cooperated by wind resist steel pipes (strengthen pipes, with wind resistance wheels). Wind load capacity reaches to 9-11 Beaufort. (Due to the door's width).The transparent window can be optional. It is 1.5 mm thick, transparent PVC soft sheets.
Track and roller cover: 2.0-2.5mm thick high quality cool-molding steel, with high quality automotive spray paint (or electrical powder coating). The motor cover is 4.0mm thick. Standard color is ivory-white (a little milky yellow).
Track: Big track with liner of wind resistance structure.
Mode of opening: The roller rolls up the strap which pulls up the sectional leaf strengthened by the steel tube. The leaf staking upon top is like the single wing of a butterfly.
Sealing: Good sealing and decrease the noise by the sealing brush in the trackA reinforced airtight fabric at the bottom of the door provides the best possible match to any uneven floor surface.
Safety Device1: Photocell safety. When the door is falling down, if any object blocks the ray, it will rebound to the top to prevent goods or persons. When closing, if a person or an object is passing or touching it, the bottom safety will order the control box, to change the motor's direction and open the door back to top, to make sure the person or object uninjured.
Safety Device 2(as option)Safety bottom edge. The door will open to top if blocked when closing, to prevent goods or men. When the door is closing, if a person or an object is passing or touching it, the bottom safety will order the control box, to change the motor's direction and open the door back to top, to make sure the person or object uninjured.
Power unit:" SEW (or SEJ)" motor.380V,3 phase,50HZ,IP55.0.75KW. (1.1-2.5KW for big doors).
With over hot proof and overloading proof.
Control unit: The control box is managed by PLC. The component is from France Schneider. The control box has open, close and stop function. Low voltage push button, safety and good quality.
Speed: The open and close speed is 0.8m/s.
Emergency operate device for power failure: Manual swing bar which can open or close the door
Automatic open type: pull roperemote, loop detector, radar as optional control mode.