China Industrial Mesh WiFi System

Industrial Wi-Fi Mesh WD-G30 is developed by WonderTek Technology (KunShan) Co.,LTD., it supports 802.11ac .The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..

l Support 802.11ac.
l Industrial IP40 style installation
l The maximum transfer distance up to 800 meters
l Self-adapt the rate
1.1.2 Manageability
l Support Remote Firmware update(TR069)
l 802.3D Ethernet Bridge.
l 802.1Q VLAN.
l Quality of Service(QoS) .
l IGMO(IPv4)Snooping&MLD(IPv6)Snooping
1.1.3Operating environment
l Working temperature: -40ºC-80ºC.
l Operating humidity: 10%-85% no condense
l Storage humidity:5%-90% no condense
1.1.4 Design standards
l HomePlug
l IEC 60529
l IEC 50022
l IEC 60068-2-6
802.11ac

Model

WD--G30

Interface

3*LAN 10/100/1000base-TX self adaption RJ45,1*DC power interface 1*

LED display light

Ethernet, PLC link ,Power ,Wi-Fi

Transfer band

2-68MHz

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3uHomePlug 802.11ac

Security

128-AES

Transfer rate(PHY)

1200Mbps

Modulation

OFDM

Manageability

Remote Firmware update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

AC 90V-520V

Operating temperature

-40ºC-80ºC

Size

220*160*100mm(LxWxH)

Weight

1.15kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC,CE class B,WEEE,RoHS

Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation
WDT hardware watch dog function
2*1000M Ethernet Port
Gateway ,Bridge,WIFI Client Model
Support: RS485,232 and Baud rate :115200bps
WIFI MESH
Built-in WIFI PA,MSTXPWR :26dbm
External dual band high gain antenna :5dbi
WIFI WPS
Power: DC or AC
Support external antenna,with SMA connector

The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.

The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.