China Industrial Wastewater Treatment Device Sewage Treatment Plant

Industrial wastewater treatment device sewage treatment plant
Description:

This machine is developed on the basis of operational experience of sewage treating device at home and broad with advanced biological treating method.It can remove BOD5,COD, NH3-N with stable performance and effective treating capacity,characteristics of auto-run and non-floor occupation saves cost and enjoys easy maintenance.Grass and flowers can be planted on the surface so the environment won't be affected.Water quality design parameters of wastewater is calculating according to the water quality of domestic sewage,this equipment has a significant treatment effect on the BOD, COD, ammonia and other organic pollutants.
Technical Parameter:

Model
WSZ
Capacity
(m³/h)0.5135102030Air blowerModelHB-0.75HB-1.1HB-2.2HB-4.4HB-8.8
HB-11.5Power
(KW)0.751.11.24.44.4x211.5PumpModel
40QW7-10-0.75
40QW10-7-0.75
50QW10-10-1.1
50QW25-7-1.5
50QW42-9-2.2Power
(KW)0.75-1.11.52.2
Inlet
Water BOD5
mg/L150-400Outlet
WaterBOD5
mg/L20-60
Floor space
(m2)4.56.51215355176*Remark:
Our company can be based on the actual water quantity, water quality situation and the site of the non-standard design.
Application:
1. Hotels, restaurants, nursing homes, hospitals.
2. Residential areas, private housing, holiday park.
3. Stations, airports, port terminals and ship.
4. Factories, mines, military, tourist, scenic.
5. And kinds of industrial wastewater similar with domestic wastewater.

Main Features:
1.The device can be buried below the earth's surface. The surface can be used as green land or square land. Therefore, the device covers no surface area. And there is no need for plant construction, neither heating and heat preservation.
2. The device use plug flow biological contact oxidation pond, the effect is better. Besides, it is smaller than active sludge pool. The applicability to the water is stronger, impact resistance performance is good, discharging water is stable, there is no sludge expansion. In addition, the new elastomeric stereoscopic materials in the oxidation pond have a higher removing rate, and also can improve the water solubility of oxygen.
3. Because of the low volume load of fillings in AO bio-treatment technology of the device, and microbes are in the stage of oxygen, it would produce less mud. Generally only 90 days for one sludge removal.
4. Except for the conventional air exhaust, the device is equipped with soil deodorization measure as well.
5. The device is equipped with fully automatic electric control system and equipment damage alarm system. The device has a good reliability, generally, there is no need for special management, a monthly or quarterly maintenance is ok.
Transportation:
After-Sales Service:
1.Detailed installation manual and maintenance guideline are provided with the equipment.
2.Technical training and site commissioning and installation are available for you.
3.Any equipment issue,we will stand by .However,the Visa fee ,air tickets,accommodation,wages will be paid by buyers.
Honor of enterprise:
Shandong Better Environmental Protection Technology Co., Ltd. is a direct manufacture factory with ten years experience in waste management and sewage treatment equipment. During the past decade, we won very good reputation among our customers all over the world by the perfect production and reliable quality, such as USA ,Turkey, Japan, Saudi Arabia, Bangladesh, Iraq, Vietnam, Singapore, Maldives, Malaysia, Argentina, Colombia, Ecuador, Mexico, Mongolia, UZ, Congo, Senegal, Nigeria, Trinidad and Tobago, Kuwait ,Kenya, etc, and got the National Patent for our products. "There is no best, only Better", it is the pursuit we will never stop. We sincerely look forward to cooperating with friends at home and abroad and warmly welcome you to cooperate together for creating the better.
FAQ:
Q1: How to buy the products?
A: You can provide us your water sources, water quality ,water quantity, water after requirement (contact us for more details).
Q2: How to install after the equipment arriving destination?
A : Don't worry .we provide on-site installation ,debugging, training and Oversea Services. (engineers available to service machinery overseas)
Q3: Can I get a discount price?
A : Of course, please contact us directly.
Q4: How to pack the products?
A : We use standard package.( If you have special package requirements, we will pack as required.)
Q5: What if the product has any problems in the future?
A : After-sales service provided.