China Infrared Gas Honeycomb Ceramic Plate Heater

Honeycomb ceramic as the infrared combustion ceramic plate is made by the high purity cordierite material and used in the gas-fired stove where it saves 20%-50% energy cost and reduces more than 90% of the harmful gas emission. This product has good thermal shock resistance (no cracks on the product if the honeycomb ceramic with 1000 is in the water with 20 for 3 times), high mechanical strength (crushing strength is 20MPa on the top and 5MPa on the side), good endurance for high temperature, high resistance for erosion.
The gas combustion is occurred inside the holes of the Infrared Ceramic Plate, and the heat energy is radiated high-efficiently in the means of ultra-red rays, avoiding energy loss through visible light. For the advantages of high combustion efficiency, well distributed heating and low exhaust gas emission, Ceramic Combustion Plate is proved to be an environmentally friendly heating technology, and it is the idea technology to replace the traditional gas combustion technology.
If coated with a black catalyst, the honeycomb ceramic can transfer the heat by infrared radiation style and this combustion style has more outstanding advantages comparing to the normal gas-fired stove combustion as below:
*20%-50% energy saving
*Mixes oxygen completely with the gas, burning efficiently with no flame and little noise
*Operating safety without being influenced by wind when operating outdoor
*Decreasing the CO and NOx poisonous gas disposal and remove harmful
Advantages:
*Save 20-50% energy consumption
*Burn without flame, low noise
*Reduce the formulation of such harmful gas as CO, NOx, etc by a large margin (more than 70%)
*Strong bearing of wind, using safely
Physical Merits:
*Good thermal shock resistance ( no cracks after 3 times thermal shock from 800 ° C to cold water)
*High mechanical strength ( crushing strength is 20MPa on the top and 5MPa on the side)
*Good endurance for high temperature
*High resistance for erosion
Application: Widely used in various burners, ovens, fryers, heaters and barbecue set which burn gas

HoleRound holeSquare holeMaterialcordieritecordieriteVolume density0.45-0.65g/L0.45-0.65g/LHole density300-320 hole/in 2260 hole/in 2 ,280 hole/in 2 ,320 hole/in 2 ,520 hole/in 2Wall thickness/0.18-0.23mm,0.28-0.33mm, 0.35-0.40mmLength of side of hole/1.06mm,1.13mm,1.2mmHole diameter1.12mm,1.25mm,1.42mm/Distance between Two Holes Axis1.8mm,2.2mm,2.7mm1.33-1.59mmOpen hole ratio33.5-46.5%63.5-73.5%Water-absorbing rate(%)> 46%> 40%thermal expansion coefficient2.0-2.3 x 10 -62.0-2.5 x 10 -6Heat stability850 ° C--25 ° C, do not crack in three times1200 ° C--25 ° C, do not crack in the condition of reduplicate coolingHighest Working Temperature( ° C)> 1375 ° C> 1375 ° CCompression Strength
(Lengthways)>13.0Mpa>10.0MpaCompression Strength
(Horizontal)>6.0Mpa>3.0Mpa
Rotundity shapeEllipse shapeSpecificationmmNumber of channels (holes /square inch)Specification (mm)Number of channels (holes /square inch)Φ 83 x 85400T146.8 x 77 x 86.4400Φ 144 x 152.4400T120.6 x 80 x 152.4400Φ 100 x 100400T169.7 x 80.7 x 76.2400Φ 130 x 130400T144.8 x 81.3 x 152.4400Φ 118 x 150400T144.8 x 81 x 76.2400Φ 103 x 100400T169.7 x 80.7 x 101.6400Φ 150 x 75400T144.8 x 81.3 x 100300Φ 83 x 125400T127 x 63.5 x 107300Φ 150 x 150300T144.8 x 81.3 x 70300Φ 120 x 100300T144.8 x 81.3 x 150300Φ 101.6 x 100300Race track shapeΦ 94 x 100300P120.65 x 80.01 x 76.2400Φ 85 x 70300P120.65 x 80.01 x 76.2200Φ 93 x 76200P144 x 68 x 150400Φ 118 x 76200P125 x 80 x 100400