China Insulation Pipe Petroleum Pipe Polyethylene Pipe

Structure
1.Steelservice pipe
2.Polyurethane rigid foam insulation
3.Hot- dip galvanizing steel casing pipeApplication range:
product application:Heating supply,cooling supply,Anti-corrosive in the field of crude oil transportation,Thermal insulation pipeline engineering
medium temperature:≤120ºC(accidental peak<140ºC).
medium pressure:≤2.5MPa.
laying mode:.It is mainly used for overhead laying and overhead laying of integAuto Repair Equipment & Tools rated pipe gallery.Production range:DN25~DN1600mm
Standard:GB/T 29047-2012Comparison tablebetweenPE outer protection insulation pipeand galvanized outer protection insulationpipe

itemPE outer protection insulation pipegalvanized outer protection
insulationpipeLaying modeIt is only suitable for buried underground, not for overhead.It is the preferred professional
pipeline for integrated pipe gallery
and overhead laying.trinityIt is necessary to improve the surface roughness of the inner wall by corona treatment to ensure the trinity structure.The spiral coil forming process is
used to ensure the trinity structure
by increasing the thread surface of
the inner wall and the adhesion of
the polyurethane insulation layer.ultraviolet resistanceNot resistant to ultraviolet light, resulting in oxidative degradation of plastic molecules, easy to crack or even collapse, so that the insulation tube lost its working capacity.Resistant to strong sunlight exposure
without corrosion, used at all kinds of
altitude, the external protection pipe
is not damaged, can fully protect the
normal work of the heat preservation
pipe.Corrosion resistanceCorrosion resistance in underground and not corrosion resistance in overhead.Thegalvanizedtubewith≥275g/m2
zinclayerthicknessandstrongcorrosion
resistancethroughnozincflowerand
passivationtreatment,whichcanprovide
anodicprotectionandanticorrosionelectrochemicalcorrosion.
Service lifeOverhead laying is used for a maximum of 3 years.Aerial laying can reach 30 ~ 50 years, and the correct selection of galvanized sheet and processing mode can also be increased.Low temperature resistanceNot resistant to low temperature, easy to crack at-20 ºC.Under low temperature condition, its performance does not change fundamentally, still has good corrosion resistance, mechanical and impact resistance, and the low temperature is free of crack.High temperature resistanceThe maximum temperature resistance is 50 ºC, otherwise it is easy to soften, fall off and deform, and the mechanical properties are completely lost.High temperature will not deform, will not produce thermal stressandwill not reduce mechanical properties.itcan withstand 50 &oPower Supply & Distribution rdm;C and more high temperature working environment, but caPrinting Machinery n be used normally, and ensure a variety of performance parameters.Impact resistanceIn the event of external force and hard object impact, easy to crack and damage.The pipe body has high strength, good toughness, strong pressure resistance, strong impact resistance, which has more ability and safety than the hard object of the anti-prying door, so it is difficult to pierce or penetrate.cost advantageMaterial cost: the external protective pipe of galvanized steel plate is used instead of pe pipe. On the material, the unit price of galvanized steel plate is 30% and 50% of that of pe material. Material dosage: because pe tube needs a certain thickness to achieve the required protective performance, so the amount of pe material is large, and the hardness and mechanical strength of galvanized steel plate itself make it achieve the same protection effect without thicker, and the dosage can be reduced by about 40% -50%.
Processing cost: the extrusion process of pe is carried out by melting, molding and cooling, and the power consumption is large, while the galvanized coil can only be combined into a circular tube with a good steel plate screw, and the energy consumption is very low. beauty advantage
XingbangplumbingistheparticipatedunitoftheNewNationalStandardinChina'sinsulationpipeindustry.

Wehaveparticipatedinformulatingthreesetsnationalstandards:(GB/T28638-2012,GB/T29046-2012,GB/T29047-2012).WehavegainedISO9001InternationalQualityManageHand Tools mentSystem,ISO14001EnvironmentManagementSystem,GB/T28001OccupationHealthSafetyManagementSystem.

Learn more about the production process>>>

FAQ:

1: Are you a manufacturer or a trading company?

We are a manufacturer which hasmore than20 years' history.

2: Where is your manufacturer? How to visit it?

Our factory located inYutian Economic Development Zone ,TangShan ,China.about 1.5 hours drive time to Beijing and TianJin airport .Mainly producing pre-insulated pipes,HDPE outer protection pipe and 3PE anti-corrosive pipe.

You can take a plane to Beijing or Tianjin.then we could pick up you at the airport .

3: How do we control our products' quality?

WeElectrical Control System have professional quality control workers and quality inspectioncenter(CNAS lab)to control the entireproduction quality.

4: How do you transport these products?

We use straps to hoist pre-insulated pipes, it can avoid no damage to our products, no hooks for lifting pipedirectly. During the handling process, collision, tossing and more ground drag scrolling are strictly forbidden.

In the process of long distance transport, the pipes should be fixed, and not damage outer protecting pipesand insulating layers.

5: Can I customize some other sizes of products?

Yes! We can according to the customer's request.
If you have any other questions, please don't hesitate, contact us.