China Intelligent Control of Brick Making Machine

NYQT6-15Fully automatic porous brick making machine
Product introduction
1. Control system: PLC intelligent control. Man-machine interface, control system configuration security logic control, production process and shows the function of fault diagnosis, and remote control system upgrade and the function of fault diagnosis and troubleshooting. Implement without professional, simple training can master operation function.
2. The vibrator: the oil pump motor synchronous vibration system, vibration velocity is adjustable, realize the low-frequency charging, the working principle of the high-frequency molding to adapt to the different material and product a good compaction effect can be obtained.Vibration acceleration can be arbitrary adjustment.
3.Forming machine frame: adopt high strength steel and special welding technology manufacturing, very strong.
4.Guide posts: adopt super special steel, chrome plated surface has a good torsional and abrasion resistance.
5.Cloth car: unique skip mandatory cloth rotate 360 degrees blanking device, thoroughly solve the wet syrup and porous brick fabric problem.
6.Raw material: can make full use of sand, stone powder, coal gangue, fly ash and steel slag, etc. Various kinds of waste residue
Main Technical Parameters:
the amount of bricks for oncemultiaperture brick :15standard brick : 30the way of making the bricksHydraumatic vibrate, pressure on the upper dieThe speed of moulding18sThe ability of design and producing
(8 hour shifts )50000 piece (standard brick)Specifications of layer board700x850x25mmequipped capacitor35.5kwThe weight of complete machine8850kgSpecifications: interlocking building
block, grass paving block, paver brickstandard brick: 240*115*53mm
multiaperture brick: 240*115*90mm
Building block: 390*190*190 mm

product namespecificationsEach plate numbermachine-teamHollow brick block390x190x190611000perforated brick240x115x901528000standard brick237x115x513057000Dutch brick200x100x601820000

Production range
Can produce all kinds of color brick (layered cloth) and the brick floor tile, terminal chain brick, lu yanshi, planting grass brick, hydraulic block, hollow block, porous brick, unburned brick standard, etc. As shown in figure:
1. As long as the mold is replaced, the equipment can produce blocks of different sizes and colors
Paving blocks.
2. Wide range of raw materials. There are cement, sand, fly ash, crushed stone, particle waste
Things, etc.
3. High frequency vibration of hydraulic system, low frequency feeding, pressure controlled by Mitsubishi PLC.
interface. 3-5 people per production line.
4. The hydraulic transmission mechanism has interlock device, and the pressure of each mechanism can be adjusted arbitrarily
Step drive cylinder. The vertical vibration system is fixed by four sliding bars, which is very easy to use,
And fixed together with bottom mold vibration. High vibration pressure and high frequency.
The product weight error is ± 2%, and the product strength is greater than 12MPa, and the error is 2%,
The geometric dimension is less than ± 1.5mm.
5. Production site, brick machine stacking, pallet stacking area and production line area:
500 / 800m2, the total area of the plant is 3500m2, and the floor area is at least 3500 square meters.
6. The operation process is simple, and the raw material ratio is 10% - 12% cement, 40% 45% sand,
Fine stone 45% - 50%, cement: Sand: Stone 1:4:5. It can be produced everywhere.
7. According to the production rate, the daily consumption of raw materials is 150t.
3.5% by weight of raw materials.
8. Equipment investment depends on the development of market buildings. As long as there is construction, the effect can be achieved. investment
Company Name: Ningbo Haishu Nuoya Cement Brick Machine Factory
Add: Gaoqiao Village, Gaoqiao Town, Haishu District, Ningbo City, Zhejiang Province, Ningbo, Zhejiang, China


http://www.nbnuoya.com/en/index.html