China Intelligent Radar Level Gauge Continuous Level Measurement Radar Level Gauge Bulk Solids Radar

Radar Level Gauge For Continuous Level Measurement Of Bulk Solids Product Description
VACORDA Radar Level Gauge For Continuous Level Measurement Of Bulk Solids adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 80 meters. Antenna is optimized further processing, the new fast microprocessors havehigher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

Measurement Range

Features:

1.Small antenna size, easy to install; Non-contact radar, no wear, no pollution.

2.Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.

3.Serious dust environment on the high level meter work has little effect.

4.A shorter wavelength, the reflection of solid surface inclination is better.

5.Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.

6.The measuring range is smaller, for a measUniversal Hardware Parts urement will yield good results.

7.High signal-to-noise ratio, the level fluctuation state can obtain better performance.

8.High frequency, measurement of solid and low dielectric constant of the best choice.

Detailed Images
♦903Suitable for Medium

Solid material, Strong dust,easy to crystallize, condensation occasion

Measuring Range70mFrequency

26GHz

Accuracy

±15mm

Process Temperature

-40ºC~130ºC(Standard type)
-40ºC~250ºC(High temperature type)

Process pressure-0.1~4.0 MPa (Flat flange)
-0.1~0.3MPa (Universal flange)Signal output

4~20mA /HART(2-wire / 4-wire)

RS485/ Modbus

Power Source

Two-wire (DC24V)

Four-wire(DC24V/AC220V)

Connection

Universal Flange

Protection Grade

IP67

Explosion-proof Grade

Exia IIC T6 Ga/Exd IIC T6 Gb

♦904

Suitable for Medium

Solid material, Strong dust,easy to crystallize, condensation occasion

Measuring Range80mFrequency

26GHz

Accuracy

±15mm

Process Temperature

-40ºC~130ºC(Standard type)
-40ºC~250ºC(High temperature type)

Process pressure-0.1~0.3MPaSignal output

4~20mA /HART(2-wire / 4-wire)

RS485/ Modbus

Power Source

Two-wire (DC24V)

Four-wire(DC24V/AC220V)

Connection

Thread, Universal Flange

Protection Grade

IP67

Explosion-proof Grade

Exia IIC T6 Ga/Exd IIC T6 Gb

♦905

Suitable for Medium

Solid particles, Powder

Measuring Range30mFrequency

26GHz

Accuracy

±15mm

Process Temperature

-40ºC~130ºC(Standard type)
-40ºC~250ºC(High temperature type)

Process pressure-0.1 ~ 4.0 MPa (Flat flange)
-0.1 ~ 0.3 MPa (Universal Flange)Signal output

4~20mA /HART(Feeder 2-wire / 4-wire)

RS485/ Modbus

Power Source

Two-wire (DC24V)

Four-wire(DC24V/AC220V)

Connection

Thread/Flange

Protection Grade

IP67

Explosion-proof Grade

Exia IIC T6 Ga/Exd IIC T6 Gb

♦906

Suitable for Medium

Hygienic liquid storage, Corrosive container

Measuring Range20mFrequency

26GHz

Accuracy

±3mm

Process Temperature

-40ºC~ 130ºC

PrIndustrial Brake ocess pressure-0.1~4.0MPaSignal output

4~20mA /HART(2-wire / 4-wire)

RS485/ Modbus

Power Source

Two-wire (DC24Pneumatic Component V)

Four-wire(DC24V/AC220V)

Connection

FlFastener & Fitting ange

Protection Grade

IP67

Explosion-proof Grade

Exia IIC T6 Ga/Exd IIC T6 Gb

Detailed Images
Our advantages
Our sercices