China Iron Aluminum Soft Magnetic Alloy Sheet Soft Magnetic Alloy Strip 1j16 Strip

Iron aluminum is soft magnetic alloy
Department of iron and aluminum alloy is aluminum containing 6% ~ 16%, the allowance is iron, has the high resistivity, low density and high hardness of the soft magnetic alloys.Department alloy suitable for special environment (such as radiation, shock, acceleration, etc.) under the conditions of use, and corrosion resistance and oxidation resistance are better than iron nickel soft magnetic alloy and silicoMachinery for Packaging Supplies n steel, therefore, in aviation, spaceflight, navigation, etc on the military industry and civilian industry won a wide application.
In the production of iron and aluminum is soft magnetic alloy have 1 j16 and j13, 1 j12, 1 j6 four gradesResistivity of department of iron and aluminum alloy increases with the increase of the content of aluminum, aluminum when the mass fraction of 16%, reach high resistivity, and the saturated magnetic induction intensity decreased with increasing of aluminium content.Alloy aluminum content score above 12%, made harder and more brittle than less plastic.Department of iron and aluminum alloy compared withPump & Vacuum Equipment the same type of iron nickel alloy, its magnetic can lower.1j16 Chemical compositionbrandCPSMnSiAlFe≤1j160.030.0150.0150.10.1515.5~16.3Bal
features
1j16 Alloy With high permeability and low coercive force, suitable for working under weak magnetic field
Chemical and physical propertiesDensity (g/cm3)6.5Electrical resistivity at 20ºC(Om*mm2/m)1.5Coefficient of linear expansion(20ºC~200ºC)X10-6/ºC10.8Saturation magnetostriction coefficient λθ/ 10-6-Curie point Tc/ ºC400
FAQ1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you want.
If we do not have, for spool LED Display wire, we can produce 1 spool, about 2-3kg. For coil wire, 25kg.
2. How can you pay for small sample amount?
We have Western union account, wire transfer for sample amount also ok.3. Customer do not have express account. How will us arrange the delivery for sample order?
Just need to provide your address information, we will check the express cost, you can arrange the express cost together with sample value.4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery and total amount. Let's talk more in details after getting your detailed requirements.5. Do you provide free samples?
If you want several meters and we have stock of your size, we can provide, customer need to bear the International express cost.6. What's our working tiConnector & Terminals me?
We will give you reply through email/Welding & Soldering Supplies phone online contact tool within 24 hours. No matter working day or holidays.