China Irradiation Crosslinked Aluminum Fireretardant Material Nontoxic Insulating IXPE Foam Manufacturers for Automotive Interiors

Foam Type: XPE FOAM / XLPE FOAM

Property

Standard

Unit

Value

Density

-

-

Kg/m³

33.33

Tensile Strength

Transverse

ISO-1798

MPa

0.22~0.23

Longitudinal

0.29~0.31

Elongation

Transverse

ISO-1798

%

90.30~100.00

Longitudinal

87.20~90.40

Tearing Strength

Transverse

ISO-8067

Kn/m

1.31~1.46

Longitudinal

1.71~1.80

Compression 25%

ISO-3386-1

kPa

31.20

Compression 40%

ISO-3386-1

kPa

58.80

Compression 50%

ISO-3386-1

kPa

90.80

Compression Set 25% 0.5H

ISO-1856

%

16.00

Compression Set 25% 24H

ISO-1856

%

9.80

Operating Temperature Range

Internal

°C

(-40,+80)

Water Absorption % Volume (Maximum)

Internal

%

0.50

Thermal Conductivity

JIS A1412-2

W/mK

0.045

Shore - C

ASTM D2240

°C

19

Flammability

FMVSS302

mm/min

-

Performance

Heat Insulation

Single foaming structure can reduce the loss of heat between air convection, suitable for making heat preservation pipes and boards.

Waterproof

Closed-cell foam, non-water-absorbing, moisture-proof.

Shock absorption

Soft texture and good resilience enable foam to have a shock absorption effect and play a protective role.Semi-hard quality foams have good rebound capabilities after strong impact.

Sound absorption

Good sound and noise absorption capability.

Fire retardanc

This product has fire-blocking and smoke-reducing property, when burned, its density is very low and doesn't melt, without any small fire ball left and with the merit of self-extinguishing.

Low conductivity factor

Conductivity of this material is 0.032w / mk at an average° C. As this product has high heat-releasing ratio, it can get the same heat-preservation effect at less half thickness of other insulating product under the same condition, saving not only space but also cost.

Application

Automotive & car

Car door membrane
1.Material:XPE foam
2.Density:100kg/m3
3.Thickness:3mm
Car air duct
1.Density:66.6kg/m3,100kg/m3
2.Thickness:4mm,4.5mm,5mm
Insulation pads
1.Material:XPE foam with aluminum foil
2.Density:33.3kg/3
3.Thickness:5mm

Product
Processing

Recommend Produ

Company Profile

CYG TEFA CO.,LTD

CYG TEFA CO.,LTD is an affiliate of the listed company WOER (Shenzhen: 002130). Established in December 2002, CYG is committed to the research and development, production and sales of cross-linked PE and PP foam materials, and is a national high-tech enterprise. There are two bases in Shenzhen and Huzhou, with more than ten various production lines with an annual production capacity of more than 6,000 tons; The main products are: ESD, XPE, IXPE, IXPP and various composite materials based on XPE, IXPE, IXPP ; Widely used in electronic communications, automotive, air-conditioning refrigeration, construction, sports protective gear, medical supplies and other industries, products are sold to many regions around the world.

Factory Tour

Exhibition

Certificate