China Keyless Entry Door Lock Handle Latch with Remote Controller Keypad for RV Camper Trailer Door

Specifications:
Material: metal
Power : 4 X AA battery (Not included)
Fits: A Clas; C Class;Fifth wheel;Travel Trailer;Camper
Replace this handle: Your current handles outside dimensions should be around 3.5" wide x 4.25" tall
Hole Dimensions: The hole size should be approx. 3.75" x 2.75" x 1.5"
RV Lock Specs: The overall product size is approx. 4.25" x 5.5"

Package included:
1 X Handle
1 X Remote controller (Not include the battery)
2 X Keys and Installation Hardware

Electronic lock operation instructions:

1. Before using the product, connect the power cable first and turn the switch on the battery holder to the ON position.

2. The remote control code: There are two holes on the battery holder (the key labeled "code reset" is recovery key, the key labeled "leern" is code key).Please use a tool with pointed pin to withstand the leern key when coding until issued "Di" sound, and then press button with a small point on the remote control until the lock sounds, so the code is successful. (Note: a point and two points button is a group; three points and four points button is a group).

3. The distance of remote control should be within 15 meters.

4. Password Settings: the factory password is 1,2,3,4.

How to change the change the password?

a, hold down the numeric keys 8, followed by holding down the lock key until a sound is sent;

b, enter the factory password 1, 2, 3, 4 followed by pressing the lock key;

c, enter your new password and then press the lock key

d, then repeat the third step.

This new password is set successfully.

5. If the password is forgotten, please use the pointed tools to withstand the code reset button until the sound is sent, thus restoring to the factory password.

6. Key use: the right lock cylinder is to control oblique mouth tongue; the left cylinder is to control the Founder tongue.