EC-01 One Door Access Control Keypad Controller Small Size 13.56MHz RFID Raeder IC Reader Wall-Mounted Waterproof OutdoorProduct DescriptionCustomer Question & Answer
Weatherproof Passive RFID Proximity 125kHz Em Access Card ReaderSpecification*Wiegand 26bits/ Wiegand34bits, RS232, RS485 interface.
*Less than 0.2 second Response Speed
*Less than 0.5 seconds Proximity Time Distance:
*5-10cm Proximity Range
*Support ID (125 kHz) or Mifare1 (13.56 MHz Frequency) Card
*-25 Cto 75 CAmbient Temperature
*10%-90% Ambient HuMilitary midity
*Built-in Antenna
*Built-in LED (DoublLeather Machinery e Color LED)
*Built-in Loud Speaker (Buzzer)
*DC 5V-16V Working Voltage.Standard Direct Current 12V
*70mA Working Furniture Making Machine Current
*100 Meters Communication Distance
*Real Time Data Transfer
*White or Black Color
*PVC Case Material (Black Resin for Water-Proof Function)
*114*76*16(mm)ModelCard Reader Access Control KeypadColorBlack /WhiteVoltageDC9~16VCurrent≤100mAAmbient Temperature-25°C~75°CReading Range5~15CMOutput FormatWiegand,RS485/232Specialized Electrical Equipment Card TypeEM-ID/Mifare-ICComunication DistanceWG≤100M,RS485≤1200M
InstallationUsing +type screw driver to loosen the screw between the panel and motherboard.And then embed the motherboard to the side wall with the plastic plug and screws.Wire ConnectionRed DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow AlarmNotice1.Confirm the electric voltagePower Tools (DC12V) and differentiate positive anode and cathode of power supply
2.When external Power is used, make sure sharing the power with Controller Box or using the same GND3.When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires