China Kingarch 750ml Permanent Aerosol Line Marking Paint

Kingarch 750ML Permanent Aerosol Line Marking Paint

Product Description
KINGARCH 750ML Line Marker is lead-free, high performance, fast-drying, acrylic resin based ine marking paint. Suitable for interior and exterior use - car parks, factories, playgrounds, sports fields, warehouses, tennis courts, gold clubs, leisure centres and roads. Ideal for marking sharp, clear, durable lines - use to produce clear demarcation lines on factory floors, car parks and warehouses. Use on asphalt, concrete, gravel and grass.
Features:
- For use on roads, carparks, factory floors, school playing fields, leisure centres & golf Courses
- Provides a hard wearing, fast drying permanent line
- Suitable for use on concrete, tarmac, wood and composites
- Can be used both internally and externally
- CFC free aerosol
Directions:
1. Surface to be marked should be dry and free from dust and grease.
2. Shake can vigorously for 1 -2 minutes until glass beads inside can move freely.
3. Invert aerosol, direct spray towards the surface to be marked from a distance of 8-12 inches.
4. Nozzle must be cleared in any pause during use. Hold can upright and spray for 2 - 3 seconds to clear nozzle.

Bottle Size

65mm*300mm

Product Packing

12 cans/case

Main function

line marking paint

Colors

White/Yellow/Blue/Red/Green/Black/Orange etc.

1-3

Brand

KINGARCH or customer label

Technical Specification

Ejection rate

≥1.5g/s(rapid construction)

Fine degree

≤ 15um(no clogging by spraying, high gloss)

Spraying area

1.5 square meter (according to the surface smooth degree and coating thickness will be a deviation)

Drying time:

5-8 mins for surface drying and 24 hours for hard drying

Spit out rate

≥98%

Bendability

≤ 2mm

Adhesion force

Level 2

HB Hardness

≥HB

PRODUCT FEATURES
1. Excellent weather resistance;

2. High gloss and color retention;

3. Good chemical resistance and water resistance;

4. Suitable with suitable primer and strong adhesion force.

5. Good leveling property, strong covering power and good polishing quality;

1. Clean surface thoroughly, removing all dirt, grease, oil, wax, rust, moisture, etc.
2. Shake can vigorously for 1-2 minutes before spraying and occasionally while in use to ensure color uniformity and prevent clogging.
3. Hold the can 20-30cm from the surface to be sprayed, press spray button firmly with steady even strokes while moving can rapidly back and forth.
4. 2 or 3 thin coats with intermittence of 10 min are better than on continuous heavy coat.
5. Always clean spray button immediately after use by tuning can upside down and pressing spray button until no more paint comes out .
6. Avoid spraying in rainy day or freezing environment.
Storage

1.Store in a cool, ventilated warehouse.

2.Away from fire, heat source.

3.Storage temperature does not exceed 50 ºC, relative humidity less than 80%.

4.Keep container closed.

Attention

KEEP IT OUT OF REACH OF CHILDREN; store it in cool, dry and well-ventilated place lower than 45 degrees; keep away from fire source; do not puncture or burn the bottle.