China Kto 011 Termostat Mechanical Termostat

2014 New adjustable mechanical termostat

BriefIntroduction

Saip/Saipwell high quality washing machine parts thermostat kto 011/ kts 011

TheKTS011 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermInsulation ostat.The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

KTO 011: Thermostat (normally closed); contact breaker for regulating heaters.
KTS 011: Thermostat (normally open); contact maker foFastener & Fitting r regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded

Switch temperature difference
7K (± 4K tolerance)
Sensor element
tFurniture Making Machine hermostatic bimetal
Contact type
snap-action contact
Service life
> 100,000 cycles
Max. Switching caEncoder pacity
250VAC, 10 (2) A
120VAC, 15 (2) A
DC 30W
Connection
2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² stranded wire (with wire end ferrule) 1.5mm²
Mounting
clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series)
Casing
plastic according to UL94 V-0, light grey
Dimensions
60 x 33 x 43mm
Weight
approx. 40g
Fitting position
variable
Operating / Storage temperature
-45 to +80°C (-49 to +176°F)
Operating / Storage humidiIntegrated Circuit ty
max. 90 % RH (non-condensing)
Protection type
IP20