China LDPE Powder Low Density Polyethylene Powder Paint for Metal Network

LDPE powder/Low density polyethylene powder paint for metal network
More Detail Information, contact with Chen:
chen
mobile:+8618551609905

LDPE powder/Low density polyethylene powder paint for metal network

Thermoplastic PE powder use Low Density Polyethylene as the basic material, modified by various functional

additives, and colored by different pigments according to the final needs. The cured membrane it

forms on the surface of metal works has excellent flexibility and impact strength, simutaneously

provides outstanding resistance to chemical, aging, and weather, along with attractive decorative

finish, a good grip and warm feel.

LDPE powder coating/Dip powder coating Specification

ItemStandardTest ResultAppearance(visual)SmoothConformGloss%(GB9754,60°)55%-60%58%Color(GB9761)Same by visualConformSpecific gravity0.92-0.950.92Average particle size220-280 umConformvicat softening point(ºC)
(GB1633)70-88ConformBending(Film Thickness200μm)
(GB6742)≤2mmConformElectrical strength Kv/mm
(GB1408)≥19ConformLow temperature resistance
(Q/HJ008-2003)-35ºC,60h no crackingConformChemical resistance
Reagent5%HCI soak 7d
(GB/T1865)The appearance of coating has no changeConform5%NaOHsoak7d
(GB/T1763)The appearance of coating has no changeConform5%NaCI soak7d(GB/T1763)The appearance of coating has no changeConform

LDPE powder coating/Dip powder coating Application:
Highway fence
Rail Fence
Dip mesh
Dip hanger
Dip steel basket
Anticorrosion pipeline
Road fences
Electroplating Hook
Refrigerator shelf network

Dip powder coating advantage:

Dip dumbbell hair piece is placed in polyethylene powder dip until the shell is completely wrapped dumbbell hair pieces are generally used polyethylene powder. Of course, useful PE dip solution. (PVC is polyvinyl chloride, PE is polyethylene, the only difference between the two is that chlorine is not used to wrap pvc food, but PE can. Cheaper and PVC.)
Dip dumbbell usually do not fade, another phenomenon Diaoqi on Dip is absolutely none. After the dip plastic adhesion well, not a piece of falling Dip dumbbell generally less than 5 kilograms, so most of the ladies dumbbells or a yoga dumbbells, dumbbell Dip thus appear to be more fancy looking, can also be used the pipe can, dip powder is also convenient to use, not easy to fall off, health and safety.

Polyethylene thermoplastic powder coatings, also known as polyethylene resin powder coating, is the high-pressure polyethylene (LDPE) as the base material, adding a variety of functional additives, color processing and production of anti-corrosion formulated powder coating, the coating layer has excellent chemical resistance , anti-aging, impact resistance, bending, acid, salt spray corrosion resistant and has good performance surface decoration.
Second, the conventional construction conditions:
1, the workpiece rust, to the oil treatment, heated to 350 ± 50 ° C (depending on the heating temperature specific heat capacity of the workpiece size, the test may be).
2, the workpiece is immersed in the fluidized bed, 10-12 seconds, and heated to 150 ° C-230 ° C, remove the surface leveling, and finally cooled to.
Another molding plastic powder, no bed.
Three main purposes:
Widely used within the grill surface coating highways, railways, parks, gardens and other guardrail, bicycle baskets, shelves, racks, refrigerator.
Four characteristics:
Phi Lu layer thicker in 0.5-3MM, has a strong impact resistance, but also a longer period of protection
More Detail Information, contact with Chen:
chen