China Lab Bench School Lab Furniture Lab Furniture

Commercial Biochemistry Lab Benches Laboratory Table Furniture

Full steel structure lab table lab bench(Durable, nice, with anti-corrosion, rust, moisture and other functions)
Steel using high-quality cold-rolled steel plate, through a die forming, the plate cutting, slotted, bending process, all welding cases of grinding and polishing processing, smooth not hurting hands. Surface after picking, phosphating and epoxy resin powder coating, with anti-corrosion, antirust and moisture-proof function.Phenolic resin
Surfaces made of cost effective High Pressure Phenolic Resin composite are resistant to chemical Manipulator stain and corrosion. Non-porous and non-conductive, it's strong durable qualities enable it to withstand high impact and shock. It is easily cleaned with soap and warm water.Epoxy resin
Because of the natural resistance to corrosion, the industry has found it superior to any other top material for laboratory work. It is resistant to most organic and inorganic chemicals and is non-toxic. In addition, it is resistant to mechanical and thermal shock.

Suspended System
The worktop is supported by cantilever steel frame system. Cupboard and drawer units are suspended from horizontal rails beneath the worktop. The under-bench units have been designed to provide clear access to the floor for cleaning.framework uses 40*60*1.5 mm quality C type steel, joint is connected by cold rolled steel sheet stamping a integrated special fittings, making the whole frame structure more reasonable. The bearing performance and stability of the platform is especially strong; Steel surface by acid, phosphate, electrostatic powder spraying process, has the corrosion resistance, fire prevention, moisture-proof function etc. Surface treatment: C type steel frame in the productElectronic Tube & Transistor ion is completed, the pretreatment includes many steps: cleaning agents, aerosol spray, rinse water, passivation seal materials coatMilitary Apparel ing after the pretreatment of steel products in drying oven for drying and cooling; After cooling steel products to spray chamber in internal and external spray powder, its thickness at least 1.5 mils to finish bottom spray steel products immediately sent to the high temperature constant temperature box for grinding and chemical processing, in order to apply the test environment to use.

Full steel structureBuilding Material Making Machinery lab table lab benchframeframework uses 40*60*1.5 mm quality C type steel with75μm epoxy resin powder coating,chemicals resistant.Cabinet1.0mm thick cold-rolled steel with 75μm epoxy resin powder coating, most chemical resistant.Reagent shelvesShelf: made of 12mm thick frosted glass; frame: made of 100*40*1.5mm steel tube coated with powders.Height850 or 900mm, (height adjustable 0-30mm)Worktops12.7/16/19mm thickness of Phenolic resin or other (Epoxy resin, ceramic, marble etc)StructureSuspended SystemAlarm & Security Systems HingeDTC105 degree high quality hingeSlidewaySelf-closing three section slide rail, no noise.HandleAluminum alloy embedded handleAccessoriesSocket, faucet, gas fitting, eyewash, pegboard, shelves, exhaust hood etc