China Lab Furniture Lab Bench Steel Laboratory Furniture

Specification:
Product name: All steel lab furniture with typical design
Type:JH-SL015
The size and colour can be custom-made requested by customers for lab furniture.
A. Worktop: The worktop is based on the requirement of customers for lab bench such asPre-Press Equipment
phenolic resin board, epoxy resin board or ceramic board. The edge of worktop will be
treated specially to ensure its safety for human body.B. Door and cabinet body: The cabinet is made of high quality 1.0/1.2mmcold rolled sheet
with different thickness as per its different loading weight. The surface is treateSpraying Machinery & Spreading Equipment d by acid
washing, phosphorization before coating by epoxy resin powder.The inside cabinet is
equipped with adjustable setting for mobile ayer. All the welding points have been polished
specially which wilPump & Vacuum Equipment l not hurt the hand. The inside cabinet is with front and back upright
columns and reinforcing ribs to increase the bearing capacity and impact esistance capacity.
We can fill the sound insulation material into the inside space between two layers if it's
required by customer.C. Handle: Stainless steel U-type handle or long handle shaped once made of steel for
lab furniture.D. Movable back panel: Movable and free dissembling structure which Meter for Electricity is convenient for
checking water, electricity and gas pipe etc.E. Hinge: Using durable 304 stainless exterior steel hinge or 304 hydraulic hinge with
excellent weight capacity which is rust resistance and can be used for long time.F. Drawer sliding rail: Using 3-joints bearing drawer rail with noise reduction, it can
ensure the full opening for the drawer with good bearing capacity and without deforming.G. Shelf: The shelf is made of steel frame and steel hanging pieces. The layer is made
of toughened glass which is suitable to put all kinds of chemicals on it. There are
multi-functional or other type of sockets on thHydraulic Press e column to satisfy the customers from
different countries for lab furniture.Installation: The installation procedures are designed to be very simple. It can be finished
perfectly only by using a screw knife. We can furnish CAD installation drawing and installation
guidance for your reference.3D design for customers by free of charge:Worktop description:AttributeSolid lab phenolic resin worktopEpoxy resin worktopCeramic worktopIngredientDipping phenolic resin into special multi-layer kraft paper,it's hot solid formed under high temperature and pressureQuartz sand and epoxy mixed with special bond.Combined clay,kaolin and feldspar mixed with many special material.Corrosive resistanceIt's resistant for many kinds of acid,alkali,solvent and reagent etc.It's resistant for many kinds of acid,alkali,solvent and reagent etc.ExcellentHeat resistanceNormal: 135 celsius. It couldn't touch flame directly.600 Celsius heat resistance1000 Celsius heat resistance
Colour
Black,gray,dark greenBlack,gray,whiteBlack,gray,white,greenWorktop thickness12.7mm,16mm,19mm16mm,19mm,25mm20mm
Water resistance
Water absorption:0.6%Water absorption:0.008%Excellent
Physics feature
GoodGoodExcellent
Packing:
1. Loading picture.