China Lab Paperboard Single Wing Free Zero Drop Test Machines

Overview:
This machine can test the surface, angle and edge of the package freely. It is equipped with a digital display height indicator and a decoder for high tracking.
The surface can accurately give the product drop height, and the preset drop height error is not More than 2% or 10mm.
The machine adopts single-arm and double-column structure, with automatic reset, electric drop and electric lifting device, which is easy to use; the unique hydraulic buffer device greatly improves the service life, stability and safety of the machine.
One-arm setting makes it easy to place the product, and the angle between the angle of impact of the drop angle and the plane of the bottom plate is less than 50.
Operating Procedure
1,Connection: connect the random power line to the three-phase power supply and connect it to the ground. The control box and the test machine are also used randomly.

2 ,Fall height adjustment: open the mainframe power supply, set the test height (method as follows), press the rise key to reach the set height; if stop in the midway, it must make it reach the set height before the reverse operation command can be executed;

3,Put the object on the work table and fix it with a fixed pole.

4,Press the rising key to raise the measured object to the set height.

5,Press the drop key to cause the working table to detached from the object in an instant, and the measured object is free to fall.

6,Press the reset button to restore the working state of the worktable.

7,Repeat the above steps if the test is repeated.

8,After testing: press the lower key to turn the work table to the lowest position to turn off the power button.
the Product Uses: of Single Wing Drop Tester
Single-arm drop tester This machine is designed to test the damage of the product package from falling, and to evaluate the impact strength during transportation and handling.

Principle Editing:
The drop tester is used to simulate the different edges, angles and faces of the product when it is dropped on the ground at different heights to understand the damage of the product and to assess the fall height of the product packaging components when they fall.
Impact strength. Therefore, according to the actual situation of the product and the scope of national standards, improve and improve the packaging design. This test machine is specially designed to test various products after being packaged and transported or transported.
Internal damage, and in order to prevent damage in advance, it is possible to use the machine to perform the test, so as to obtain the best solution, so as to minimize the loss during transportation and to evaluate the impact of the electronic components on the handling.
Strength; equipment for testing the reliability of the diamond, angle and surface of the container.
Technical Parameter

ModelRS-DP-10RS-DP-12RS-DP-14maximum payload200kg200kg300kgDrop height range0-1000mm0-1000mm0-1200mmMaximum size of specimenL(mm)100012001200W(mm)100012001200H(mm)100012001200plate sizeL(mm)190023002300W(mm)160018002200H(mm)606060Outer size of test machineL(mm)190019002300W(mm)180018002200H(mm)280031003400Test modeEdge, surface, angleBody weight240028003400Power consumption2.5Applicable standardISTAIA ASTM D5276work environment25°±3°,55-85%RH