China Laboratory Dissolution Tester with Simultaneous Administration

Laboratory Dissolution Tester With Simultaneous Administration
Description
RC series of instruments are used for detecting velocity and extent of pharmic dissolution from tablet, capsule etc in prescriptive menstruum.The RC807 series dissolution tester has 8 cups and 16 cups models, which fully meet the requirements of the Chinese Pharmacopoeia and the consistency evaluation of the quality and efficacy of generic drugs, and the technical indicators have reached the international advanced level.

Feature
Dosing system:
Dosing power: electric, automatic.
Dosing method: horizontal board.
Dosing mode: simultaneous administration, sequential administration.
Sequence dosing and stirring pause function: optional.
Lighting system: white light, red light, three-level PWM dimming lighting.
Lifting system: bamboo type single column lifting + double cone positioning.
Rights management: three levels and seven users.
Audit trail: 128 x 366 days.
Login method: username + password, fingerprint.
online printing: Support.
Performance:
Fully in line with Chinese Pharmacopoeia.
It fully meets the requirements for consistency evaluation of quality and efficacy of generic drugs.
Automatic height-clutch (interchangeable methods).
Fully adjustable cup holder.
The head is lifted electrically.
DC brushless water pump with low noise and long life.
PTC heater, water flow sensor, temperature switch, triple protection.
Germany imported 1 / 3B class high-precision Pt1000 temperature sensor with fast response speed and high accuracy.
Equipped with an electric dosing system, which can realize automatic synchronous dosing and sequential dosing modes. When sequential dosing, you can choose whether to pause stirring or not.
White light, red light, three-level PWM dimming system, no color cast, and meet the requirements of light-proof samples.
Redundant wiring design to ensure the connector is firm and reliable.
Rights management system.
Audit trail function.
RC1607 has a dual-zone dual-control cycle system, which can be set at different temperatures and has better uniformity.
RC1607 has a dual-zone dual-control stirring system, which can set different stirring speeds and has better uniformity.
Equipped with a micro printer for on-site printing.
Taiwan Shangyin bamboo joint lifting column, with double cone positioning, low noise and accurate positioning.
Equipped with capacitive fingerprint recognition system, fast recognition speed and high accuracy.
Can be configured with LAN, WiFi, Bluetooth, RS232, RS485 and other interfaces.
Specification
Model
RC-807/RC-1607
Number of devices
8 cups / 12 cups
Dedicated rehydration cup
0 cup / 4 cup
Applicable methods
basket method, paddle method, small cup method, dish method (large and small dishes), drum method (long and short drum)
Area
single area single control / dual area dual control
Range
25RPM-250RPM
Direction
clockwise, counterclockwise
Resolution
0.1RPM
Accuracy
± 4%
Swing amount
≤1mm
Accuracy
37 ºC ± 0.5 ºC
Other models:
RC-1 dissolution testerRC-3 dissolution tester
RC-6 dissolution testerRC-8 dissolution tester
ModelRC-1RC-3RC-6RC-8No.s of vessel and poles1 vessels and 1 poles
one line3 vessels and 3 poles,
one line6 vessels and 6 poles,
one line8 vessels and 6 poles in total
6 vessels and 2poles in back, 2 vessels at front, two linesMode of head moveturn over by manualSpeed range (20~200)rpmSpeed accuracy ±2rpmTemperature range ambient to +45.0ºCTemperature Stability ±0.3ºCPreset timing nine points (5~900)min(5~900)min(1~999)min(1~999)minTime accuracy ±0.3%Paddle radial run-out±0.5mmBasket radial run-out ±1.0mmPower 220V/50Hz/600W220V/50Hz/600W220V/50Hz/1200W220V/50Hz/1200WDimension 260*300*480mm460*300*480mm960*320*480mm960*440*480mm
Head part is is lifting by electric automatically.




ModelRC-6DRC-8DRC-8DSRC-12DSNo.s of vessel and poles6 vessels and 6 poles,
one line8 vessels and 6 poles in total
6 vessels and 2poles in back, 2 vessels at front, two lines8 vessels and 8poles in total,
4 vessels and 4 poles in each line, two lines12 vessels and 12poles in total,
6 vessels and 6 poles in each line, two linesMode of head moveLifting automaticallySpeed range (20~200)rpmSpeed accuracy ±2rpmTemperature range ambient to +45.0ºCTemperature Stability ±0.3ºCPreset timing nine points (1~999)minTime accuracy ±0.3%Paddle radial run-out ±0.5mmBasket radial run-out ±1.0mmPower 220V/50Hz/1200W or 110V/60Hz/1200WDimension 960*400*480mm960*520*480mm680*540*480mm960*540*480mm