China Lamination Overlay Pvc Film Coated Overlay Film Lamination Overlay Film

A4 inkjetable lamination overlay pvc film, PVC overlay core

Material name:PVC laminated adhesive film, Overlay glue film.

Specifications

high initial stick force,
slow rustiness,
color inhibition,
nTimer & Counter ot easy to change shape while lamination

Product Name

PVC coated overlay films for ID card
Item NO.: AB500-80
Pvc Card Overlay Film:

All sorts of materials for cards applicable to various,ID card,for examples,credit card,IC card,tale-communication card,and every kind of tangible or un tangible card..

BrandNameAlleItemNo.AB500-80ColorMilky white(natural color),Increased whiteMaterialPVCThickness scope0.08(can customize such as: 0.04,0.06,0.08,0.1etc)Specification210*297(A4)Package200pieces/packApplicationlaminated together with inkjet materials.

Specifications:

1:surface layer:0.05mm-0.10mm

2:inner layer:0.08-0.8mm

3:according to require the sage coule be varied.

Sphere of Application
AB500-80 coated overlay films are mostly used for high-grade cards such as bank cards, IC cards, social security cards, RF cards, etc.

Chemical Specifications
Gravity:(20/4°C)1.25g/cm³
chloride content 56~58%
Products of low molecular are easy to solution in solvents like ketones, esters and chlorinated hydrocarbon, etc, while products of high molecular are difficult.
acid and alkali resistance, wearing resistance, electrical insulating property, fire resistance, can be rope soled, water resistance, resist heat, innocuity, high initial stick force, color inhibition

Physical Specifications
Gravity of rigid pvc: 1.38-1.43 g/cm³
High Mechanical Strength
Good chemical stabilityManufacture Method
1)Put priPower Supply & Distribution nting core and two overlay together, then put into the laminator, the temperature is determined as per the instruction of the machine , Pls be noticed that all glue sides of both pvc sheets and overlay are put inward.
2)The lamination usually lasts 10-15minutes ,The pressure is 6-8Mpa, The temperature is 120-140°C
3)Cut the cardSize and Packing
Thickness: 0.04-0.2mm
Width: ≤1300mm
Length: ≤2000mm
Packing with PE films, in rolls or sheets, wooden pallets or cardboard boxesThe ability of fellow products
high initial stick force(reaches to 7-8N/CM)
color inhibition, not easy to change shape while lamination, easy to use with a smooth surface.
PACKING DETIAL

4). Steps to make card is as following:
1,Use inkjet printer to print the image on the surface of printable sheet ,Be sure use mirror image printing mode and wait until the ink dried (about 5-10minutes)
Geographic Surveying Instrument 2, Discharge the printed sheet, PVC film with glue, stainless steel laminate according to the law in the laminated tray.
3.Placed the laminated tray in the mouth of the laminatingStamping machine, lock plus lever and press laminating machines start button.
4. Use the PVC electric special punch card machine cut the card into standard specifications, or use the small manual card machine.
5.Use the manual Braille machine marked the Braille code in the appropriate location of the VIP card, discount card or others cards.
Contact information:
Name: Kelly cao
Mobile: +0086 131 66208253