China Laminator for Hard Biscuit Line with Stable Function

Laminator DC1000
Feature:
For Hard biscuit production, sheeting and overlapping the dough, increase layered of biscuit.
Parameter:
1. Lamination method: cut-off lamination, number of lamination layers: 8-12 layers
2. Cut-off method: electric, the cut-off position is tracked by an electric eye
3. Feeding and calendering twice
4. Feeding trough roll diameter: Ø400, the surface is rust-proof,
Special treatment such as anti-sticking, surface hardness: HRC58-62
5. Roll diameter: Ø300, the surface is rust-proof,
Special treatment such as anti-sticking, surface hardness: HRC58-62
6. Rolling surface width: 600, lamination width: 950mm (1150mm), electric adjustment of surface thickness
7. Dimensions: 3350x1650x2300 , weight: 6Tpower : 10KW
8. The side board is made of Q235 carbon steel, and the thickness after processing is 28mm,
The surface is plated with hard chrome, the surface hardness is HRC58-62
9. The conveyor frame plate uses Q235 carbon steel material, the thickness after processing is 15mm,
The surface is plated with hard chrome, the hardness is HRC58-62
10. The pallet uses 304 stainless steel
11. The roller and the conveyor belt are controlled by independent motors, which is easy to adjust
12. The diameter of the conveyor driving roller is Ø160, the surface is covered with rubber, and the rubber material is non-toxic and oil-resistant material
13. The conveyor belt uses European imported PU belt with a thickness of 1.3mm
14. The conveyor belt adopts pneumatic tensioning and uses anti-deflection guide bars to prevent deviation, and the cylinder uses Korean famous brand YSC;
15. The scraper uses a 2mm thick blade, which has the characteristics of cleaning up and not hurting the roll
16. The enclosure uses 1.5mm304 stainless steel material
17. The surface of roller, transition knife, etc. are plated with hard chrome
18. Transition mode: roller flat transition
19. The main drive adopts chain drive
20. Adopt no sanitary dead angle structure design, safe and sanitary
21. Install safety protection devices such as emergency stop switches
22. SEW/Siemens for main motor and reducer, frequency conversion speed regulation,
23. Roll gap is detected by displacement sensor, accurate digital display, speed and thickness touch screen control
24. The line layout is neat and beautiful, and the wire trough uses aluminum alloy (when equipped with a production line)
25. Control appliances mainly use French brands: Schneider
26. Bearings use Japanese brand: NSK


OUR SUPPLIERS

OUR COMPANY

.